Slotted Bit Sockets 1/4" Dr.
- 1/4" drive slotted bit sockets let you turn small flat-head screws with a ratchet for better control and speed.
- Six blade sizes from 0.5 x 3.0mm to 1.2 x 7.0mm, suited to electronics, appliances and light assemblies.
- Four lengths of 45mm, 70mm, 100mm and 140mm let you reach screws set deep in housings.
- Made of High Speed Tool Steel, a hard steel that helps the fine slotted tip keep its edge.
- Fits standard 1/4" drive ratchets, extensions and handles, adding screwdriving to any small socket set.
Available Sizes (18) Show all 18 sizes Hide sizes
-
Size 0.5 x 3.0mm · Length 45mm
$4.71
-
Size 0.5 x 3.0mm · Length 70mm
$7.10
- Size 0.5 x 3.0mm · Length 100mm Out of stock Sold out
-
Size 0.5 x 3.0mm · Length 140mm
$11.77
-
Size 0.6 x 4.0mm · Length 45mm
$4.71
-
Size 0.6 x 4.0mm · Length 70mm
$7.10
-
Size 0.6 x 4.0mm · Length 100mm
$10.75
-
Size 0.6 x 4.0mm · Length 140mm
$11.77
-
Size 0.8 x 5.0mm · Length 45mm
$4.71
-
Size 0.8 x 5.0mm · Length 70mm
$6.17
-
Size 0.8 x 5.0mm · Length 100mm
$10.75
-
Size 0.8 x 5.0mm · Length 140mm
$11.77
-
Size 0.8 x 5.5mm · Length 45mm
$5.41
-
Size 1.0 x 6.0mm · Length 45mm
$5.41
-
Size 1.0 x 6.0mm · Length 70mm
$7.10
-
Size 1.0 x 6.0mm · Length 100mm
$10.75
-
Size 1.0 x 6.0mm · Length 140mm
$11.77
- Size 1.2 x 7.0mm · Length 45mm Out of stock Sold out
Genius Tools Slotted Bit Sockets 1/4" Dr.
Small slotted screws in appliances, electronics, instruments and light machinery are easy to damage with the wrong tool. These Genius Tools 1/4" drive slotted bit sockets put a precise flat blade on a socket body, so you can turn them with a ratchet or handle for steady, controlled force.
Six blade sizes are offered: 0.5 x 3.0mm, 0.6 x 4.0mm, 0.8 x 5.0mm, 0.8 x 5.5mm, 1.0 x 6.0mm and 1.2 x 7.0mm. All six come in the 45mm length, while the most common blades, 0.5 x 3.0mm to 1.0 x 6.0mm without the 0.8 x 5.5mm, also come in 70mm, 100mm and 140mm lengths. That gives eighteen bit sockets in the series.
The longer versions reach screws buried deep inside housings without needing a separate extension. Each bit socket is made of High Speed Tool Steel, a hard steel that helps the thin blade resist wear.
- Type: slotted bit socket
- Drive: 1/4"
- Blade sizes: 0.5 x 3.0mm to 1.2 x 7.0mm (6 sizes)
- Lengths: 45mm, 70mm, 100mm, 140mm
- Material: High Speed Tool Steel
| Type | Slotted & Phillips Bit Sockets |
|---|
