Philips Head Drivers 3/8" Dr.
- Phillips head drivers for 3/8" drive ratchets give you strong, controlled turning on cross-head screws.
- Four tip sizes, #1, #2, #3 and #4, cover small cross-head screws up to large ones on equipment and vehicles.
- Every tip size comes in 52mm, 60mm and 76mm lengths, for twelve options to suit different clearances.
- Ratchet power helps free stubborn cross-head screws that would cam out under a hand screwdriver.
- Made of Chrome Molybdenum Steel for a durable driver suited to ratchet-driven work.
Available Sizes (12) Show all 12 sizes Hide sizes
-
Size #1 · Length 52mm
$12.35
-
Size #1 · Length 60mm
$13.00
-
Size #1 · Length 76mm
$13.66
-
Size #2 · Length 52mm
$12.35
-
Size #2 · Length 60mm
$13.00
-
Size #2 · Length 76mm
$13.66
- Size #3 · Length 52mm Out of stock Sold out
-
Size #3 · Length 60mm
$14.61
-
Size #3 · Length 76mm
$15.34
-
Size #4 · Length 52mm
$13.88
-
Size #4 · Length 60mm
$14.61
- Size #4 · Length 76mm Out of stock Sold out
Genius Tools Philips Head Drivers 3/8" Dr.
Cross-head screws are everywhere, and the tight ones are often the hardest to remove by hand. These Genius Tools Phillips head drivers fit on a 3/8" drive ratchet, so you can apply firm, steady pressure and turning force at the same time.
Four tip sizes are available: #1, #2, #3 and #4. The #1 and #2 suit most everyday screws, while #3 and #4 handle the larger cross-head fasteners found on brake parts, machinery covers and heavy equipment.
Each tip is offered in three lengths: 52mm for close-quarters work, 60mm as a general choice, and 76mm for extra reach into recesses. That gives twelve drivers in the series.
The drivers are made of Chrome Molybdenum Steel and fit the 3/8" drive ratchets, extensions and handles you already use. Adding a few of these to a 3/8" drive kit means stubborn cross-head screws no longer slow the job down.
- Type: Phillips head driver
- Drive: 3/8"
- Tip sizes: #1, #2, #3, #4
- Lengths: 52mm, 60mm, 76mm
- Material: Chrome Molybdenum Steel
| Type | Head Drivers |
|---|
