Wobble Extension Bars 1/4" Dr.
- 1/4 inch drive wobble extension bars let the socket tilt slightly, so you can reach fasteners that are a little off-line.
- Six lengths from 50mm to 300mm: 50mm, 75mm, 100mm, 150mm, 225mm and 300mm.
- Wobble end gives a small angle of movement without the floppiness of a full universal joint, keeping good control.
- Longer bars reach deep-set fasteners while short bars add just enough clearance for the ratchet head.
- Made of Chrome Vanadium Steel for strength in everyday use with 1/4 inch drive ratchets and sockets.
Available Lengths (6) Show all 6 lengths Hide lengths
-
Length 50mm
$6.27
-
Length 75mm
$6.38
-
Length 100mm
$8.30
-
Length 150mm
$10.28
-
Length 225mm
$14.64
- Length 300mm Out of stock Sold out
Genius Tools Wobble Extension Bars 1/4" Dr.
Genius Tools Wobble Extension Bars with a 1/4 inch drive add reach and a little flexibility. The wobble end lets the socket sit at a slight angle to the bar, which makes it easier to get onto a fastener that is not directly in line with the ratchet.
Six lengths are available: 50mm, 75mm, 100mm, 150mm, 225mm and 300mm. Short bars give clearance for the ratchet head, while the longer bars reach fasteners deep inside engine bays, dashboards and equipment.
A wobble extension is a useful middle ground between a straight extension and a universal joint. It gives enough angle to get around minor obstructions while staying stable enough to guide the socket onto the fastener.
Each bar is made of Chrome Vanadium Steel, a strong alloy used in quality hand tools. The 50mm, 100mm and 150mm sizes are also offered together as a 3 piece set.
- Type: wobble extension bar
- Drive: 1/4" square
- Lengths: 50mm, 75mm, 100mm, 150mm, 225mm, 300mm
- Material: Chrome Vanadium Steel
| Type | Accessories |
|---|
