Triple Square Head Drivers 3/8" Dr.
- Triple square head drivers turn 12-point XZN fasteners, common on European vehicles, using a 3/8" drive ratchet.
- Five sizes, M5, M6, M8, M10 and M12, cover the triple square screws most often found in automotive work.
- Each size is available in 52mm, 60mm and 76mm lengths, giving fifteen drivers for different clearances.
- Correct-fit triple square tip seats fully in the fastener, helping prevent stripped heads on axle and driveline bolts.
- Made of Chrome Molybdenum Steel for strength under the turning loads of ratchets and other 3/8" drive handles.
Available Sizes (15) Show all 15 sizes Hide sizes
-
Size M5 · Length 52mm
$10.74
-
Size M5 · Length 60mm
$11.30
-
Size M5 · Length 76mm
$11.87
-
Size M6 · Length 52mm
$10.74
-
Size M6 · Length 60mm
$11.30
-
Size M6 · Length 76mm
$11.87
-
Size M8 · Length 52mm
$12.07
-
Size M8 · Length 60mm
$12.70
-
Size M8 · Length 76mm
$13.34
-
Size M10 · Length 52mm
$13.88
-
Size M10 · Length 60mm
$12.70
-
Size M10 · Length 76mm
$15.34
-
Size M12 · Length 52mm
$12.07
-
Size M12 · Length 60mm
$12.70
-
Size M12 · Length 76mm
$15.34
Genius Tools Triple Square Head Drivers 3/8" Dr.
Triple square fasteners have a 12-point internal recess and are widely used on European cars for CV joints, seats, door hinges and driveline parts. Trying to turn them with a hex or star bit risks stripping the head, so a dedicated triple square driver is the right tool.
This Genius Tools 3/8" drive series covers five sizes: M5, M6, M8, M10 and M12. Each size is offered in 52mm, 60mm and 76mm overall lengths, so there are fifteen drivers to choose from.
Use the 52mm drivers where space is tight, and the 76mm versions when the fastener sits deeper in a recess. Fitting the correct size fully into the recess spreads the load across all twelve points and protects the fastener.
All drivers are made of Chrome Molybdenum Steel to handle ratchet-driven loads. For anyone servicing European vehicles, a few triple square drivers are an essential part of a 3/8" drive kit.
- Type: triple square head driver
- Drive: 3/8"
- Sizes: M5, M6, M8, M10, M12
- Lengths: 52mm, 60mm, 76mm
- Material: Chrome Molybdenum Steel
| Type | Head Drivers |
|---|
