Triple Square Head Drivers 1/2" Dr.
- Triple square head drivers in 1/2" drive for 12-point XZN fasteners on CV joints, axles and driveline parts.
- Nine sizes from M5 up to M19, including the large M14, M16 and M18 sizes found on heavy driveline bolts.
- Every size comes in a 60mm length, and M5 to M10 are also offered at 76mm for extra reach into recesses.
- The 1/2" drive lets you use a full-size ratchet or breaker bar on tight triple square bolts.
- Made of Chrome Molybdenum Steel to stand up to heavy ratchet and breaker bar loads.
Available Sizes (18) Show all 18 sizes Hide sizes
-
Size M5 · Length 60mm
$13.34
-
Size M5 · Length 76mm
$16.63
-
Size M6 · Length 60mm
$13.34
-
Size M6 · Length 76mm
$16.63
-
Size M8 · Length 60mm
$17.23
-
Size M8 · Length 76mm
$21.49
-
Size M10 · Length 60mm
$17.23
-
Size M10 · Length 76mm
$21.48
-
Size M12 · Length 60mm
$17.23
-
Size M12 · Length 76mm
$21.49
-
Size M14 · Length 60mm
Special Price $7.57 Regular Price $19.80
-
Size M14 · Length 76mm
$21.49
- Size M16 · Length 60mm Out of stock Sold out
-
Size M16 · Length 76mm
$22.50
- Size M18 · Length 60mm Out of stock Sold out
- Size M18 · Length 76mm Out of stock Sold out
- Size M19 · Length 60mm Out of stock Sold out
- Size M19 · Length 76mm Out of stock Sold out
Genius Tools Triple Square Head Drivers 1/2" Dr.
Larger triple square fasteners, the 12-point XZN type used on many European vehicles, are often torqued tightly on axles, CV joints and drivetrain components. A 1/2" drive triple square driver lets you put a full-size ratchet or breaker bar on them without risking the recess.
This Genius Tools series covers nine sizes: M5, M6, M8, M10, M12, M14, M16, M18 and M19. All nine sizes come in a 60mm overall length, and M5, M6, M8 and M10 are also offered in a longer 76mm version, making thirteen drivers in all.
A correctly sized triple square tip sits fully in the fastener and spreads the turning force across all twelve points. That is the best way to avoid stripping the head of a costly or hard-to-replace bolt.
Every driver is made of Chrome Molybdenum Steel for strength under heavy turning loads.
- Type: triple square head driver
- Drive: 1/2"
- Sizes: M5 to M19 (9 sizes)
- Lengths: 60mm, 76mm (M5 to M10)
- Material: Chrome Molybdenum Steel
| Type | Head Drivers |
|---|
