Taper Bit Extractors
- Taper bit extractor removes broken bolts, studs and screws by biting into a pilot hole drilled in the damaged fastener.
- Eight sizes cover capacities from 3mm (1/8 inch) up to 16mm (21/32 inch) to suit small screws through larger bolts.
- Lengths grow with size, from 60mm on the smallest extractor to 130mm on the largest, giving reach into deep holes.
- The tapered shape wedges tighter as you turn, gripping the inside of the fastener so it can be backed out.
- An essential rescue tool for automotive, machinery and maintenance work when a fastener snaps or its head is stripped.
Available Lengths (8) Show all 8 lengths Hide lengths
-
Length 60mm
$3.68
-
Length 70mm
$3.97
-
Length 75mm
$4.41
-
Length 80mm
$5.01
-
Length 85mm
$5.45
-
Length 105mm
$16.68
-
Length 125mm
$23.63
-
Length 130mm
$26.40
Genius Tools Taper Bit Extractors
A snapped bolt or stripped screw can stop a repair cold. Genius Tools Taper Bit Extractors give you a way out: drill a pilot hole in the broken fastener, insert the extractor and turn it. The taper wedges tighter the more you turn, gripping the fastener from the inside so it can be backed out of the thread.
The series includes eight sizes. Capacities are 3mm (1/8 inch), 5mm (3/16 inch), 6mm (15/64 inch), 8mm (5/16 inch), 9mm (3/8 inch), 12mm (15/32 inch), 14mm (9/16 inch) and 16mm (21/32 inch). Lengths increase from 60mm to 130mm as the extractors get larger, giving more reach for fasteners that broke off deep in a hole.
Choose the extractor that matches the fastener you need to remove, or keep a range on hand so you are prepared when an exhaust stud, cylinder head bolt or small machine screw lets go.
- Type: taper bit extractor
- Capacity: 3mm (1/8") to 16mm (21/32")
- Lengths: 60mm to 130mm
- Sizes in series: 8
| Type | Automotive Tools |
|---|
