T-Handles (Universal Joint) 3/8" Dr.
- T-handles with a universal joint at the drive end let a 3/8 inch drive socket turn at a steep angle to the shaft.
- Two lengths are available: 420mm (item 324203U) and 700mm (item 327003U) for normal and extra-deep reach.
- The universal joint helps reach fasteners hidden behind brackets, hoses or frame members without extra adapters or joints.
- The two-hand T grip spreads the turning force evenly and makes fast work of spinning nuts on long threads.
- Made of Chrome Vanadium Steel, as listed for the Genius Tools 3/8 inch drive accessories.
Available Lengths (2) Show all 2 lengths Hide lengths
-
Length 420mm
$34.00
-
Length 700mm
$37.40
Genius Tools T-Handles (Universal Joint) 3/8" Dr.
Genius Tools T-Handles (Universal Joint) 3/8 inch Dr. pair a long T-handle with a universal joint at the square drive. The joint lets the socket follow the fastener even when the handle has to come in from the side, which is often the case under vehicles and inside machinery.
Choose the 420mm length for most repair work or the 700mm length when you need to reach far into an assembly from outside it. The long shaft keeps your hands clear of the work area while still giving good control.
Compared with stacking a ratchet, extension and separate universal joint, an all-in-one T-handle is simpler to handle and keeps the drive together as one tool.
Both lengths are made of Chrome Vanadium Steel and fit any 3/8 inch drive socket. Choose the 420mm handle for frequent everyday reach or the 700mm handle for deep work inside frames and machinery, and you will spend less time hunting for adapters and joints when a bolt sits at an awkward angle.
- Type: T-handle with universal joint drive
- Drive: 3/8" square
- Lengths: 420mm, 700mm
- Material: Chrome Vanadium Steel
| Type | Hand Sockets |
|---|
