T-Handle Ratcheting Screwdrivers 1/4" Hex Shank
- T-handle ratcheting screwdriver for 1/4 inch hex bits, combining strong two-handed leverage with a ratcheting action.
- Ratcheting lets you keep turning without regripping or lifting the bit from the screw after every turn.
- Overall lengths of 72mm, 100mm, 135mm and 250mm, with shank lengths from 22mm to 200mm for extra reach.
- The short 72mm model is also offered with a quick release chuck for fast, one-handed bit changes.
- Made of Chrome Vanadium Steel for a strong shank and bit socket that handle high turning force.
Available Lengths (5) Show all 5 lengths Hide lengths
Genius Tools T-Handle Ratcheting Screwdrivers 1/4" Hex Shank
A T-handle gives more turning force than a straight screwdriver grip, which helps with stubborn screws and long fasteners. Genius Tools T-Handle Ratcheting Screwdrivers add a ratchet to that handle, so you can keep driving without taking the bit out of the screw.
Five versions are available, all for 1/4 inch hex shank bits. The 72mm model has a 22mm shank and comes with or without a quick release chuck. Longer models have a 50mm shank at 100mm overall, an 85mm shank at 135mm and a 200mm shank at 250mm, for screws set deep inside machines and housings.
The quick release chuck lets you change bits quickly and holds them firmly while you work. All T-handle models are made of Chrome Vanadium Steel and pair with the full range of Genius Tools 1/4 inch hex bits. Pick the short model for general bench work and the 250mm model when the fastener is buried deep inside an assembly.
- Type: T-handle ratcheting screwdriver
- Bit fitting: 1/4" hex
- Overall lengths: 72mm, 100mm, 135mm, 250mm
- Quick release chuck: available on 72mm model
- Material: Chrome Vanadium Steel
| Type | Accessories |
|---|
