Square Head Drain Plug Socket 1/2" Dr.
- Designed to service male square drain plugs, such as square-head oil and transmission drain plugs found on many vehicles.
- Choose an 8mm or 10mm square to match the plug, so the socket seats fully and does not round off the corners.
- Available in a short 38mm length for low clearance and a 75mm length for plugs that sit deeper or behind guards.
- Standard 1/2 inch square drive works with your 1/2 inch ratchet, breaker bar or torque wrench for controlled tightening.
- Four versions in this series let you pick the exact square size and length combination your vehicle needs.
Available Lengths (4) Show all 4 lengths Hide lengths
Genius Tools Square Head Drain Plug Socket 1/2" Dr.
The Genius Tools Square Head Drain Plug Socket is made for male square drain plugs, the kind with a raised square head instead of a hex. Using a proper square socket rather than pliers or an adjustable wrench helps you remove and refit the plug without rounding its corners, which matters on plugs that are opened at every service.
The series comes in two square sizes, 8mm and 10mm, and two lengths. The 38mm version keeps the tool low for plugs with little room underneath, while the 75mm version adds reach for plugs set back behind skid plates, crossmembers or housings. That gives four combinations to choose from.
All versions have a 1/2 inch drive, so they connect directly to a 1/2 inch ratchet for removal and a 1/2 inch torque wrench for refitting the plug to the correct tightness. It is a small, specific tool that makes routine oil and fluid changes quicker and cleaner.
- Type: square head drain plug socket
- Drive: 1/2"
- Square sizes: 8mm, 10mm
- Lengths: 38mm, 75mm
| Type | Automotive Tools |
|---|
