Spinner Handles
- Spinner handles join a 1/4 inch hex shank to a square drive, so sockets can be used on a bit driver or handle.
- Choose a 1/4 inch, 3/8 inch or 1/2 inch square drive end, all in a compact 65mm length.
- A longer 140mm version in 1/4 inch drive adds reach for nuts set down in channels or recesses.
- Lets you spin nuts and bolts on and off quickly before final tightening with a ratchet or wrench.
- Made of Chrome Vanadium Steel for a strong square drive end that holds sockets securely.
Available Lengths (4) Show all 4 lengths Hide lengths
-
Drive Size 1/4" · Length 65mm
$3.69
- Drive Size 1/4" · Length 140mm Out of stock Sold out
-
Drive Size 3/8" · Length 65mm
$3.69
-
Drive Size 1/2" · Length 65mm
$4.73
Genius Tools Spinner Handles
Genius Tools Spinner Handles are small adapters with a 1/4 inch hex shank on one end and a square drive on the other. Fitted into a screwdriver handle, ratcheting screwdriver or power driver, they let you drive sockets just like a bit.
The series has four versions. The 65mm length comes in 1/4 inch, 3/8 inch and 1/2 inch square drive, so you can pick up small sockets or larger ones from your existing sets. A 140mm long version in 1/4 inch drive gives extra reach for nuts that sit below the surface.
Using a spinner handle is a fast way to run fasteners down or back them out, especially on long threads, before you switch to a ratchet or torque wrench for the final tightening.
All spinner handles are made of Chrome Vanadium Steel. They are also included in the BE-2343 three piece spinner handle set shown on the same catalog page.
- Type: spinner handle, 1/4" hex shank to square drive
- Drive: 1/4", 3/8", 1/2" square
- Lengths: 65mm, 140mm (1/4" drive)
- Material: Chrome Vanadium Steel
| Type | Accessories |
|---|
