Spinner Handles (for Electric Drill)
- Spinner handles made for electric drills let you run sockets in a drill chuck for fast nut and bolt work.
- Two chuck versions: one sized for a 9.5mm drill chuck and one for a 13mm drill chuck.
- Each version comes with a 1/4 inch, 3/8 inch or 1/2 inch square drive end, six handles in all.
- Compact 65mm length keeps the socket close to the drill for control and good visibility of the work.
- Made of Chrome Vanadium Steel so the square drive stays tight in sockets during powered use.
Available Options (6) Show all 6 options Hide options
-
Drive Size 1/4" · Product Type For 9.5mm Drill Chuck
$3.70
-
Drive Size 1/4" · Product Type For 13mm Drill Chuck
$3.70
-
Drive Size 3/8" · Product Type For 9.5mm Drill Chuck
$3.70
-
Drive Size 3/8" · Product Type For 13mm Drill Chuck
$4.26
-
Drive Size 1/2" · Product Type For 9.5mm Drill Chuck
$4.97
-
Drive Size 1/2" · Product Type For 13mm Drill Chuck
$4.75
Genius Tools Spinner Handles (for Electric Drill)
Genius Tools Spinner Handles for Electric Drill turn an ordinary drill into a quick socket driver. Clamp the handle in the drill chuck, fit a socket on the square drive, and you can run nuts and bolts on and off far faster than by hand.
There are two versions to match the drill you own. One is sized for a 9.5mm drill chuck and the other for a 13mm drill chuck, as printed in the catalog. Each version is available with a 1/4 inch, 3/8 inch or 1/2 inch square drive, so you can use small, medium or large sockets. All six handles are 65mm long.
They are handy for assembly work, shelving, machinery covers and any job with many repeated fasteners. Use the drill to spin fasteners down, then finish with a hand ratchet or torque wrench.
The handles are made of Chrome Vanadium Steel and are also sold as the BE-2343A and BE-2343P three piece sets.
- Type: spinner handle for electric drill
- Drive: 1/4", 3/8", 1/2" square
- Fits: 9.5mm or 13mm drill chuck
- Length: 65mm
- Material: Chrome Vanadium Steel
| Type | Accessories |
|---|
