Spark Plug Sockets 1/2" Dr.
- Spark plug sockets for 1/2 inch drive, deep enough to reach down the plug well and seat fully on the plug hex.
- Two sizes with 6-point openings: 16mm (5/8 inch) and 20.6mm (13/16 inch), the common plug hex sizes.
- The 6-point opening grips the flats of the plug hex firmly, helping avoid rounding when a plug is tight.
- Both sockets are 70mm long, giving good reach while still fitting a 1/2 inch drive ratchet in the engine bay.
- Made of Chrome Vanadium Steel, the material printed for the Genius Tools 1/2 inch drive accessory page.
Available Sizes (2) Show all 2 sizes Hide sizes
-
Size 16mm (5/8")
$8.36
-
Size 20.6mm (13/16")
$9.69
Genius Tools Spark Plug Sockets 1/2" Dr.
Genius Tools Spark Plug Sockets 1/2 inch Dr. are dedicated sockets for removing and installing spark plugs with 1/2 inch drive tools. They are made deep enough to clear the plug insulator so the socket fully engages the hex.
Two sizes are available, both with 6-point openings: 16mm (5/8 inch) and 20.6mm (13/16 inch). These two sizes cover the plugs used in a large share of cars, trucks and small engines. Each socket is 70mm long.
The 6-point opening bears on the flats of the plug hex and holds securely when breaking loose a plug that has been in place for a long time. Using a 1/2 inch drive ratchet gives plenty of leverage on stubborn plugs, especially in larger engines and equipment.
Both sockets are made of Chrome Vanadium Steel. Pair either size with a 1/2 inch drive extension when the plugs sit deep in the cylinder head, and keep the matching swivel version for plugs at an angle.
- Type: spark plug socket, 6-point
- Drive: 1/2" square
- Sizes: 16mm (5/8"), 20.6mm (13/16")
- Length: 70mm
- Material: Chrome Vanadium Steel
| Type | Accessories |
|---|---|
| Point | 6 Point |
