Slotted Head Drivers 1/2" Dr.
- Slotted head drivers for 1/2" drive ratchets give strong, controlled turning of large flat-head screws.
- Five blade sizes from 1.2 x 8.0mm up to 2.5 x 16.0mm (thickness x width) for medium to large slotted screws.
- Each blade comes in 60mm and 76mm lengths, so you can choose a compact driver or one with more reach.
- The 1/2" drive delivers more force than smaller drives, ideal for seized or heavily tightened slotted fasteners.
- Made of Chrome Molybdenum Steel for a strong driver that copes with heavy ratchet-driven loads.
Available Lengths (10) Show all 10 lengths Hide lengths
-
Length 60mm · Product Type T x W 1.2 x 8.0
$14.98
-
Length 60mm · Product Type T x W 1.6 x 10.0
$17.23
-
Length 60mm · Product Type T x W 2.0 x 12.0
$17.23
-
Length 60mm · Product Type T x W 2.5 x 14.0
$17.23
-
Length 60mm · Product Type T x W 2.5 x 16.0
$17.23
-
Length 76mm · Product Type T x W 1.2 x 8.0
$18.69
-
Length 76mm · Product Type T x W 1.6 x 10.0
$21.49
-
Length 76mm · Product Type T x W 2.0 x 12.0
$18.69
-
Length 76mm · Product Type T x W 2.5 x 14.0
$21.49
-
Length 76mm · Product Type T x W 2.5 x 16.0
$18.69
Genius Tools Slotted Head Drivers 1/2" Dr.
Large slotted screws on machinery, older vehicles and heavy equipment can be very hard to turn with a hand screwdriver. These Genius Tools slotted head drivers fit a 1/2" drive ratchet or breaker bar, giving you the leverage and control to free them.
The series includes five blade sizes, listed as thickness x width: 1.2 x 8.0mm, 1.6 x 10.0mm, 2.0 x 12.0mm, 2.5 x 14.0mm and 2.5 x 16.0mm. Each one is available in 60mm and 76mm overall lengths, for ten drivers in total.
Matching the blade to the slot is important. A blade that fills the slot spreads the force and helps prevent the tip from slipping out and damaging the screw head. The wider blades in this 1/2" drive series cover larger screws than the 3/8" drive range.
All drivers are made of Chrome Molybdenum Steel. Each driver is sold individually, so you can choose exactly the blade widths and lengths your work requires.
- Type: slotted head driver
- Drive: 1/2"
- Blade sizes (T x W): 1.2 x 8.0mm to 2.5 x 16.0mm (5 sizes)
- Lengths: 60mm, 76mm
- Material: Chrome Molybdenum Steel
| Type | Head Drivers |
|---|
