Slotted Bit Sockets 3/8" Dr.
- Slotted bit sockets for 3/8" drive ratchets, giving flat-blade screws the turning power and control of a socket tool.
- Five blade sizes run from 0.6 x 4.0mm to 1.6 x 9.0mm, listed as blade thickness by blade width.
- Every size comes in 50mm, 110mm, 140mm, 180mm and 220mm lengths, 25 choices for different reach.
- Long versions up to 220mm reach slotted screws deep in housings without needing a separate extension bar.
- Made of High Speed Tool Steel so the blade edge resists chipping and twisting under ratchet torque.
Available Sizes (25) Show all 25 sizes Hide sizes
-
Size 0.6 x 4.0mm · Length 50mm
$5.69
-
Size 0.6 x 4.0mm · Length 110mm
$9.78
-
Size 0.6 x 4.0mm · Length 140mm
$12.17
-
Size 0.6 x 4.0mm · Length 180mm
$12.19
-
Size 0.6 x 4.0mm · Length 220mm
$15.84
-
Size 0.8 x 5.0mm · Length 50mm
$5.69
-
Size 0.8 x 5.0mm · Length 110mm
$11.25
-
Size 0.8 x 5.0mm · Length 140mm
$12.17
-
Size 0.8 x 5.0mm · Length 180mm
$12.19
-
Size 0.8 x 5.0mm · Length 220mm
$15.84
-
Size 1.0 x 6.0mm · Length 50mm
$5.69
-
Size 1.0 x 6.0mm · Length 110mm
$11.25
-
Size 1.0 x 6.0mm · Length 140mm
$12.17
-
Size 1.0 x 6.0mm · Length 180mm
$12.19
-
Size 1.0 x 6.0mm · Length 220mm
$15.84
-
Size 1.2 x 8.0mm · Length 50mm
$6.31
-
Size 1.2 x 8.0mm · Length 110mm
$10.37
-
Size 1.2 x 8.0mm · Length 140mm
$14.54
-
Size 1.2 x 8.0mm · Length 180mm
$14.91
-
Size 1.2 x 8.0mm · Length 220mm
$19.74
-
Size 1.6 x 9.0mm · Length 50mm
$7.25
-
Size 1.6 x 9.0mm · Length 110mm
$11.93
-
Size 1.6 x 9.0mm · Length 140mm
$14.54
-
Size 1.6 x 9.0mm · Length 180mm
$17.14
-
Size 1.6 x 9.0mm · Length 220mm
$19.74
Genius Tools Slotted Bit Sockets 3/8" Dr.
Genius Tools Slotted Bit Sockets fit a flat screwdriver blade to a 3/8" square drive. Using a ratchet on slotted screws gives more torque and steadier control than a hand screwdriver, which helps when screws are tight, painted over or corroded.
The series covers five blade sizes: 0.6 x 4.0mm, 0.8 x 5.0mm, 1.0 x 6.0mm, 1.2 x 8.0mm and 1.6 x 9.0mm. Each is available in 50mm, 110mm, 140mm, 180mm and 220mm overall lengths. Match the blade thickness and width to the slot for a full, secure fit that reduces slipping.
All bit sockets are made of High Speed Tool Steel. A hard blade keeps its square edges longer, so it stays seated in the slot and is less likely to cam out and damage the screw or surrounding surface.
Slotted bit sockets are especially useful on older equipment, electrical panels and engine parts where large flat-blade screws are still common. A 3/8" drive ratchet gives far better control than pushing and twisting a long screwdriver by hand.
- Type: slotted bit socket
- Drive: 3/8"
- Blade sizes: 0.6 x 4.0mm - 1.6 x 9.0mm (5 sizes)
- Lengths: 50mm, 110mm, 140mm, 180mm, 220mm
- Material: High Speed Tool Steel
| Type | Slotted & Phillips Bit Sockets |
|---|
