SAE Pin Punches
- SAE pin punches sized in inch fractions for driving roll pins, dowels and solid pins out of their holes.
- Nine punches from 1/16 inch to 5/16 inch, with 3/16 and 1/4 inch offered in two lengths.
- Overall lengths (L) from 100mm to 200mm, with pin lengths (L1) from 25mm to 100mm.
- Made of High Speed Tool Steel, a hard tool steel that resists bending and wear at the slim pin end.
- Inch sizes match the pins used on SAE machinery, vehicles and equipment for a correct, snug fit.
Available Sizes (9) Show all 9 sizes Hide sizes
-
Size 1/16" · Product Type L 100
$6.56
-
Size 3/32" · Product Type L 100
$7.54
-
Size 1/8" · Product Type L 125
$6.56
-
Size 5/32" · Product Type L 140
$9.46
-
Size 3/16" · Product Type L 160
$10.38
-
Size 3/16" · Product Type L 200
$11.49
-
Size 1/4" · Product Type L 160
$12.27
-
Size 1/4" · Product Type L 200
$12.33
-
Size 5/16" · Product Type L 200
$13.96
Genius Tools SAE Pin Punches
Genius Tools SAE Pin Punches are the inch-sized counterpart to the metric pin punches. The straight, parallel pin end follows a pin right through its hole, making them the right tool for removing roll pins, dowels and solid pins from SAE equipment.
The series is made of High Speed Tool Steel, as printed in the catalog, so the small-diameter punches keep their shape under repeated striking.
Nine punches cover 1/16, 3/32, 1/8, 5/32, 3/16, 1/4 and 5/16 inch. The two smallest are 100mm long, the 1/8 inch punch 125mm and the 5/32 inch 140mm. The 3/16 and 1/4 inch sizes come in both 160mm and 200mm lengths, and the 5/16 inch punch is 200mm long. Printed pin lengths (L1) run from 25mm to 100mm.
Choose the punch closest to the pin diameter for a clean drive without spreading the pin. The longer versions help when pins sit deep inside a housing, hinge or linkage.
- Type: pin punch, SAE
- Sizes: 1/16 inch to 5/16 inch (9 punches)
- Overall length (L): 100mm to 200mm
- Pin length (L1): 25mm to 100mm
- Material: High Speed Tool Steel
| Type | Punches & Chisels |
|---|
