SAE Impact Sockets 3/8" Dr. (Cr-Mo)
- SAE 3/8 inch drive impact sockets made of Chrome Molybdenum Steel, a tough material suited to impact wrenches.
- Fourteen inch sizes from 1/4 inch to 7/8 inch, including 11/32, 19/32 and 25/32 inch.
- Six point opening holds the fastener on its flats, helping prevent rounded corners under impact loads.
- Lengths of 28mm, 30mm and 32mm keep the profile short for working close to the fastener.
- Use with 3/8 inch impact wrenches, ratchets and extension bars for inch hardware on vehicles and equipment.
Available Sizes (14) Show all 14 sizes Hide sizes
-
Size 1/4"
$3.62
-
Size 5/16"
$3.62
-
Size 11/32"
$3.62
-
Size 3/8"
$4.16
-
Size 7/16"
$4.16
-
Size 1/2"
$3.62
-
Size 9/16"
$3.62
- Size 19/32" Out of stock Sold out
-
Size 5/8"
$4.40
-
Size 11/16"
$4.83
-
Size 3/4"
$5.78
-
Size 25/32"
$6.31
-
Size 13/16"
$7.50
-
Size 7/8"
$9.81
Genius Tools SAE Impact Sockets 3/8" Dr. (Cr-Mo)
Genius Tools SAE Impact Sockets in 3/8 inch drive with Chrome Molybdenum Steel construction are made for people who use their impact wrench every day on inch fasteners. Chrome Molybdenum is valued in impact sockets for its toughness under repeated blows.
The series offers 14 sizes: 1/4, 5/16, 11/32, 3/8, 7/16, 1/2, 9/16, 19/32, 5/8, 11/16, 3/4, 25/32, 13/16 and 7/8 inch. The odd sizes are handy on older trucks and machinery where a near-fit socket could slip and damage the fastener.
Lengths are 28mm for the smaller sizes, 30mm in the middle of the range and 32mm for 11/16 to 7/8 inch. A six point opening grips the flats of the nut for a secure hold.
Choose from single sizes or build a full set, and add the Chrome Molybdenum extension bars and adapters from the same catalog section to complete your 3/8 inch impact kit.
- Type: 6 point impact socket
- Drive: 3/8"
- Sizes: 1/4" - 7/8" (14 sizes)
- Lengths: 28mm - 32mm
- Material: Chrome Molybdenum Steel
| Type | Impact Sockets |
|---|---|
| Point | 6 Point |
