SAE Impact Sockets 1/2" Dr. (Cr-V)
- SAE 1/2 inch drive impact sockets in 18 inch sizes from 5/16 inch up to 1-1/4 inch.
- Covers larger inch sizes such as 15/16, 1, 1-1/16, 1-1/8, 1-3/16 and 1-1/4 inch for heavy hardware.
- Six point opening grips the flats of the fastener, helping avoid rounding under impact wrench torque.
- Compact 38mm to 46mm lengths keep the impact wrench close to the fastener for control.
- Made of Chrome Vanadium Steel for strength in trucks, trailers, farm equipment and machinery work.
Available Sizes (18) Show all 18 sizes Hide sizes
-
Size 5/16"
$3.62
-
Size 3/8"
$4.16
-
Size 7/16"
$4.16
-
Size 1/2"
$4.16
-
Size 9/16"
$4.16
-
Size 19/32"
$4.16
-
Size 5/8"
$4.16
-
Size 11/16"
$3.62
-
Size 3/4"
$4.77
-
Size 25/32"
$5.25
-
Size 13/16"
$5.25
-
Size 7/8"
$5.95
-
Size 15/16"
$7.13
-
Size 1"
$6.90
-
Size 1-1/16"
$8.82
-
Size 1-1/8"
$9.76
-
Size 1-3/16"
$11.22
-
Size 1-1/4"
$12.31
Genius Tools SAE Impact Sockets 1/2" Dr. (Cr-V)
Genius Tools SAE Impact Sockets with a 1/2 inch drive are made for inch fasteners on trucks, trailers, tractors and industrial equipment. Use them on a 1/2 inch impact wrench to break loose and run down nuts and bolts quickly.
The series offers 18 sizes: 5/16, 3/8, 7/16, 1/2, 9/16, 19/32, 5/8, 11/16, 3/4, 25/32, 13/16, 7/8, 15/16, 1, 1-1/16, 1-1/8, 1-3/16 and 1-1/4 inch. That spread takes you from small fittings up to large inch hardware in one drive size.
Lengths are 38mm, 40mm and 46mm, growing with the socket size. A six point opening contacts the flat sides of the fastener for a secure hold, which is especially important on rusted or heavily torqued bolts.
Each socket is made of Chrome Vanadium Steel. Pick single sizes or assemble the full range, and pair them with the 1/2 inch impact adapters and extension bars in the same catalog section.
- Type: 6 point impact socket
- Drive: 1/2"
- Sizes: 5/16" - 1-1/4" (18 sizes)
- Lengths: 38mm - 46mm
- Material: Chrome Vanadium Steel
| Type | Impact Sockets |
|---|---|
| Point | 6 Point |
