SAE Hex Nut Drivers
- SAE hex nut drivers give you a socket on a screwdriver handle for fast, controlled work on inch nuts and hex screws.
- Seven inch sizes: 3/16, 1/4, 5/16, 11/32, 3/8, 7/16 and 1/2 inch, the common SAE nut driver range.
- A 70mm shaft on every driver, with overall lengths from 165mm on small sizes to 190mm on the 1/2 inch.
- Ideal for appliance panels, HVAC units, electrical boxes and vehicles, where hex head screws are used everywhere.
- Made of Chrome Vanadium Steel to give the hex socket strength and resistance to wear.
Available Sizes (7) Show all 7 sizes Hide sizes
-
Size 3/16"
$9.47
-
Size 1/4"
$9.47
-
Size 5/16"
$11.74
-
Size 11/32"
$10.21
-
Size 3/8"
$10.21
-
Size 7/16"
$11.74
-
Size 1/2"
$12.43
Genius Tools SAE Hex Nut Drivers
Genius Tools SAE Hex Nut Drivers are built for inch-size nuts and hex head screws. With the socket fixed to a screwdriver handle, they are quicker to use than a socket set when you need to remove and refit many small fasteners, such as on appliance covers, HVAC units or electrical enclosures.
Seven sizes are available: 3/16, 1/4, 5/16, 11/32, 3/8, 7/16 and 1/2 inch. Every driver has a 70mm shaft. The 3/16 and 1/4 inch are 165mm overall, the 5/16 to 7/16 inch are 180mm, and the 1/2 inch is 190mm for extra grip on the largest size.
A nut driver lets you spin fasteners on in a straight line and finish them by hand with good feel, so screws are snug without stripping sheet metal or plastic.
The drivers are made of Chrome Vanadium Steel for a hard-wearing socket. If you need extra reach, the long SAE nut drivers carry the same sizes on a 150mm shaft.
- Type: hex nut driver
- Sizes: 3/16" to 1/2" (7 SAE sizes)
- Shaft length: 70mm
- Overall length: 165mm, 180mm, 190mm
- Material: Chrome Vanadium Steel
| Type | Nut Drivers |
|---|
