SAE Hex Impact Screwdriver Bits
- SAE hex impact screwdriver bits in inch sizes, made to slot into matching hex shank bit holders.
- Thirteen sizes from 9/16" to 1-3/8", in 1/16" steps after 3/4", for large imperial hex fasteners.
- Hex shank grows with bit size: 19mm, 22mm, 27mm or 32mm, so match the bit to your holder.
- Replaceable bits let you swap a worn tip without replacing the whole hex bit socket.
- Made of Chrome Molybdenum Steel, giving durable bits for heavy-duty driving of large imperial internal hex fasteners.
Available Sizes (13) Show all 13 sizes Hide sizes
-
Size 9/16"
$16.95
- Size 5/8" Out of stock Sold out
-
Size 3/4"
$19.49
-
Size 13/16"
$19.37
-
Size 7/8"
$22.28
-
Size 15/16"
$22.99
-
Size 1"
$22.99
-
Size 1-1/16"
$26.61
-
Size 1-1/8"
$36.17
-
Size 1-3/16"
$33.88
-
Size 1-1/4"
$36.31
-
Size 1-5/16"
$45.91
-
Size 1-3/8"
$50.09
Genius Tools SAE Hex Impact Screwdriver Bits
These Genius Tools SAE hex impact screwdriver bits are designed for shops that work on imperial internal hex fasteners. Each bit has a hex shank that seats in a matching bit holder, making it the replaceable tip of a heavy-duty hex bit socket.
Thirteen inch sizes are offered: 9/16", 5/8", 3/4", 13/16", 7/8", 15/16", 1", 1-1/16", 1-1/8", 1-3/16", 1-1/4", 1-5/16" and 1-3/8". The 9/16" to 3/4" bits use a 19mm hex shank and are 45mm long; 13/16" to 1" use a 22mm shank at 50mm; 1-1/16" to 1-1/4" use a 27mm shank at 55mm; and 1-5/16" and 1-3/8" use a 32mm shank at 60mm.
Being able to replace just the bit keeps running costs down, since the holder can stay in service while worn bits are swapped out.
All bits are made of Chrome Molybdenum Steel for strength under heavy loads. Use them alongside the matching metric bits to cover both standards with the same holders.
- Type: hex impact screwdriver bit
- Shank: 19mm, 22mm, 27mm, 32mm hex
- Sizes: 9/16" to 1-3/8" (13 sizes)
- Lengths: 45mm to 60mm
- Material: Chrome Molybdenum Steel
| Type | Head Drivers |
|---|
