SAE Hex Bit Sockets 1/4" Dr.
- SAE hex bit sockets for 1/4" drive ratchets, sized in inch fractions for American-standard socket head and set screws.
- Nine sizes run from 1/16" to 1/4", including 5/64", 3/32" and 7/64" for fine instrument and set screw work.
- Every size comes in 45mm, 70mm, 100mm and 140mm lengths, making 36 options to suit shallow or deep fasteners.
- Made of High Speed Tool Steel so the small hex tips resist twisting and wear on frequent use.
- Using a ratchet instead of a hex key speeds up runs of screws and gives more controlled turning force.
Available Sizes (36) Show all 36 sizes Hide sizes
-
Size 1/16" · Length 45mm
$4.71
-
Size 1/16" · Length 70mm
$7.10
-
Size 1/16" · Length 100mm
$10.75
-
Size 1/16" · Length 140mm
$10.23
-
Size 5/64" · Length 45mm
$4.71
-
Size 5/64" · Length 70mm
$6.17
-
Size 5/64" · Length 100mm
$10.75
-
Size 5/64" · Length 140mm
$10.23
-
Size 3/32" · Length 45mm
$5.41
-
Size 3/32" · Length 70mm
$6.17
-
Size 3/32" · Length 100mm
$9.35
-
Size 3/32" · Length 140mm
$11.77
-
Size 7/64" · Length 45mm
$5.41
-
Size 7/64" · Length 70mm
$6.17
-
Size 7/64" · Length 100mm
$10.75
-
Size 7/64" · Length 140mm
$10.23
-
Size 1/8" · Length 45mm
$5.41
-
Size 1/8" · Length 70mm
$6.17
-
Size 1/8" · Length 100mm
$9.35
-
Size 1/8" · Length 140mm
$11.77
-
Size 5/32" · Length 45mm
$5.41
-
Size 5/32" · Length 70mm
$6.17
-
Size 5/32" · Length 100mm
$9.35
-
Size 5/32" · Length 140mm
$10.23
-
Size 3/16" · Length 45mm
$5.41
-
Size 3/16" · Length 70mm
$6.17
-
Size 3/16" · Length 100mm
$10.75
-
Size 3/16" · Length 140mm
$10.23
-
Size 7/32" · Length 45mm
$5.41
-
Size 7/32" · Length 70mm
$7.10
-
Size 7/32" · Length 100mm
$10.75
-
Size 7/32" · Length 140mm
$11.77
-
Size 1/4" · Length 45mm
$4.71
-
Size 1/4" · Length 70mm
$6.17
-
Size 1/4" · Length 100mm
$10.75
-
Size 1/4" · Length 140mm
$10.23
Genius Tools SAE Hex Bit Sockets 1/4" Dr.
The Genius Tools SAE Hex Bit Sockets combine an inch-size hex tip with a 1/4" square drive. They are made for internal hex screws measured in fractions of an inch, common on American machinery, tools, firearms accessories and furniture hardware.
The series includes nine sizes: 1/16", 5/64", 3/32", 7/64", 1/8", 5/32", 3/16", 7/32" and 1/4". Each is offered in four overall lengths, 45mm, 70mm, 100mm and 140mm, so you can keep a compact socket for tight areas and a long one for screws set deep inside a part.
These bit sockets are made of High Speed Tool Steel, a hard steel that helps the very small sizes keep their shape. A correct-fitting SAE tip avoids the slop of using a near-metric key, reducing the chance of rounding a screw head.
If your shop works on both inch and metric equipment, keeping this SAE series next to its metric counterpart makes it easy to grab the right fit. The small 1/4" drive is ideal for light assembly work where a big ratchet would be clumsy.
- Type: SAE hex bit socket
- Drive: 1/4"
- Sizes: 1/16" - 1/4" (9 sizes)
- Lengths: 45mm, 70mm, 100mm, 140mm
- Material: High Speed Tool Steel
| Type | Hex & Wobble Hex Bit Sockets |
|---|
