SAE Hand Sockets (12-Point) 3/8" Dr.
- Standard-length 3/8 inch drive hand sockets with a 12-point opening, sized in SAE fractions for American-made vehicles, machinery and fasteners.
- Fourteen sizes run from 1/4 inch up to 7/8 inch, including less common 11/32, 19/32 and 25/32 inch openings.
- The 12-point opening engages a hex fastener in twice as many positions, so the socket seats quickly in tight spaces with a short ratchet swing.
- Compact body lengths of 28mm to 32mm keep the ratchet close to the work where clearance above the bolt head is limited.
- Made of Chrome Vanadium Steel, the material Genius Tools uses throughout its 3/8 inch drive socket range for everyday shop and service work.
Available Sizes (14) Show all 14 sizes Hide sizes
-
Size 1/4"
$3.23
-
Size 5/16"
$3.23
-
Size 11/32"
$3.23
-
Size 3/8"
$3.23
-
Size 7/16"
$3.23
-
Size 1/2"
$3.23
-
Size 9/16"
$3.23
-
Size 19/32"
$3.56
-
Size 5/8"
$3.99
-
Size 11/16"
$4.34
-
Size 3/4"
$5.20
-
Size 25/32"
$5.69
-
Size 13/16"
$5.77
-
Size 7/8"
$6.65
Genius Tools SAE Hand Sockets (12-Point) 3/8" Dr.
Genius Tools SAE Hand Sockets (12-Point) are standard-depth sockets for 3/8 inch square drive ratchets, extensions and handles. They are the everyday socket for working on SAE nuts and bolts in automotive, equipment and general maintenance jobs.
The series covers fourteen inch sizes from 1/4 inch to 7/8 inch. Besides the common steps such as 3/8, 1/2, 9/16 and 3/4 inch, it includes in-between sizes 11/32, 19/32 and 25/32 inch that are often missing from basic sets, so you can fit the right socket instead of forcing a near-match.
A 12-point opening gives twice the engagement positions of a 6-point socket. That makes it faster to slip onto a fastener when you can only see it at an angle or only swing the ratchet a few degrees. Overall lengths stay short, from 28mm on the small sizes to 32mm on the largest.
Each socket is made of Chrome Vanadium Steel. Pick single sizes to replace a lost socket or fill gaps in an existing 3/8 inch drive set.
- Type: 12-point standard hand socket, SAE
- Drive: 3/8" square
- Sizes: 1/4" - 7/8" (14 sizes)
- Length: 28mm - 32mm
- Material: Chrome Vanadium Steel
| Type | Hand Sockets |
|---|---|
| Point | 12 Point |
