SAE Extra Long Wobble Hex Key Wrenches
- SAE extra long wobble hex keys reach deep inch hex screws and drive them even from an angle.
- Ten inch sizes: 1/16, 5/64, 3/32, 1/8, 5/32, 3/16, 7/32, 1/4, 5/16 and 3/8 inch.
- Long arms from 90mm to 224mm and short arms from 14mm to 40mm, matched to each size.
- Wobble end speeds up work around obstructions; the straight short end gives full grip for final tightening.
- Made of Chrome Vanadium Steel for reliable strength across the full length of the key.
Available Sizes (10) Show all 10 sizes Hide sizes
-
Size 1/16"
$5.01
-
Size 5/64"
$5.01
-
Size 3/32"
$4.55
-
Size 1/8"
$4.55
-
Size 5/32"
$4.55
-
Size 3/16"
$5.91
-
Size 7/32"
$6.12
-
Size 1/4"
$6.12
-
Size 5/16"
$9.19
-
Size 3/8"
$11.79
Genius Tools SAE Extra Long Wobble Hex Key Wrenches
Genius Tools SAE Extra Long Wobble Hex Key Wrenches are designed for inch hex socket screws that are both deep and awkward to reach. The long arm carries a wobble end that can engage the screw at an angle, so you do not need a straight line from your hand to the fastener.
Ten sizes are offered: 1/16, 5/64, 3/32, 1/8, 5/32, 3/16, 7/32, 1/4, 5/16 and 3/8 inch. Long arm lengths range from 90mm to 224mm, and the short arm from 14mm to 40mm.
Use the wobble end to run screws in and out quickly past frames, housings and other parts, then turn the key round and use the short end for final tightening with full contact and more leverage.
Every key is made of Chrome Vanadium Steel. They are a smart companion to the metric wobble keys for mixed fleets and equipment.
- Type: extra long wobble hex key
- Sizes: 1/16" to 3/8" (10 SAE sizes)
- Long arm: 90mm to 224mm
- Short arm: 14mm to 40mm
- Material: Chrome Vanadium Steel
| Type | Extra Long Wobble Hex Key Wrenches |
|---|
