Ribe Bit Sockets 3/8" Dr.
- Ribe bit sockets for driving splined Ribe fasteners, common in automotive work, with a ratchet or torque tool.
- Ten sizes run from M4 to M14, including M7, M9 and M13, for an exact fit on each fastener.
- Every size comes in 50mm, 76mm and 110mm overall lengths, a total of 30 choices.
- A correct Ribe profile engages the rounded splines fully, so the fastener turns without being chewed up.
- Made of High Speed Tool Steel to keep the spline teeth sharp and strong under load.
Available Sizes (30) Show all 30 sizes Hide sizes
-
Size M4 · Length 50mm
$6.92
-
Size M4 · Length 76mm
$8.48
-
Size M4 · Length 110mm
$12.46
-
Size M5 · Length 50mm
$6.92
-
Size M5 · Length 76mm
$8.48
-
Size M5 · Length 110mm
$12.46
-
Size M6 · Length 50mm
$6.02
-
Size M6 · Length 76mm
$8.48
-
Size M6 · Length 110mm
$12.46
-
Size M7 · Length 50mm
$9.36
-
Size M7 · Length 76mm
$11.52
-
Size M7 · Length 110mm
$15.81
-
Size M8 · Length 50mm
$8.14
-
Size M8 · Length 76mm
$11.52
-
Size M8 · Length 110mm
$15.81
-
Size M9 · Length 50mm
$10.48
-
Size M9 · Length 76mm
$14.45
-
Size M9 · Length 110mm
$17.46
-
Size M10 · Length 50mm
$10.48
-
Size M10 · Length 76mm
$14.45
-
Size M10 · Length 110mm
$17.46
-
Size M12 · Length 50mm
$11.87
-
Size M12 · Length 76mm
$16.34
-
Size M12 · Length 110mm
$24.65
-
Size M13 · Length 50mm
$16.06
-
Size M13 · Length 76mm
$19.28
-
Size M13 · Length 110mm
$30.26
-
Size M14 · Length 50mm
$16.06
-
Size M14 · Length 76mm
$19.28
-
Size M14 · Length 110mm
$30.26
Genius Tools Ribe Bit Sockets 3/8" Dr.
Ribe fasteners have a splined recess with rounded teeth and are found on many vehicle assemblies. Using a hex or star bit in them usually damages the recess. These Genius Tools Ribe Bit Sockets have the correct profile in a one-piece bit socket.
This series offers ten sizes: M4, M5, M6, M7, M8, M9, M10, M12, M13 and M14. Each size is available in 50mm, 76mm and 110mm overall lengths, so you can use a short socket where clearance is tight and a longer one to reach fasteners inside the work.
All sockets are made of High Speed Tool Steel, giving a hard tip that holds the spline shape. The same catalog page lists the BS-2310S and BS-3411S Ribe sets, which combine sizes from two drive sizes into one kit.
Ribe sizes are close to each other, so having the full run from M4 to M14 means you always have an exact match. Seat the socket fully before turning, especially on fasteners that have been in place for years.
- Type: Ribe bit socket
- Sizes: M4 - M14 (10 sizes)
- Lengths: 50mm, 76mm, 110mm
- Material: High Speed Tool Steel
| Type | Ribe Bit Sockets |
|---|
