Philips Screwdrivers (155mm - 98mm)
- Philips screwdrivers in tip sizes #0 to #4, from fine electronics screws to large construction screws.
- Seventeen versions with overall lengths from a 98mm stubby to a 400mm long-reach driver.
- The #2 tip alone comes in seven lengths, from 98mm to 400mm, so the most common screw size is always covered.
- Round or hex shank depending on the version; a hex shank accepts a wrench when a screw will not budge.
- Made of High Speed Tool Steel so the cross tip resists wear and stays sharp in the screw recess.
Available Sizes (17) Show all 17 sizes Hide sizes
-
Size #0 · Length 155mm
$8.93
-
Size #1 · Length 98mm
$7.40
-
Size #1 · Length 170mm
$8.88
-
Size #1 · Length 200mm
$9.24
-
Size #1 · Length 330mm
$14.87
-
Size #2 · Length 98mm
$7.96
-
Size #2 · Length 175mm
$11.49
-
Size #2 · Length 200mm
$12.20
-
Size #2 · Length 225mm
$12.76
-
Size #2 · Length 250mm
$11.83
-
Size #2 · Length 300mm
$18.27
-
Size #2 · Length 400mm
$13.68
-
Size #3 · Length 245mm
$22.75
-
Size #3 · Length 270mm
$20.72
-
Size #3 · Length 320mm
$21.64
-
Size #3 · Length 390mm
$20.72
-
Size #4 · Length 320mm
$31.05
Genius Tools Philips Screwdrivers (155mm - 98mm)
Genius Tools Philips Screwdrivers cover the full range of cross-head screws, with 17 versions across tip sizes #0, #1, #2, #3 and #4.
The #0 driver is 155mm long for small screws. The #1 is offered at 98mm, 170mm, 200mm and 330mm. The #2, the most widely used size, comes at 98mm, 175mm, 200mm, 225mm, 250mm, 300mm and 400mm. The #3 is available at 245mm, 270mm, 320mm and 390mm, and the #4 at 320mm.
Blade lengths range from 38mm on the 98mm stubby drivers up to 300mm on the longest #2 driver, while handles grow from 60mm to 120mm with the tip size. Some versions have a round shank and others a hex shank, which allows a wrench to be used for extra force.
All drivers are made of High Speed Tool Steel. Matching the tip number to the screw is the simplest way to stop cam-out and stripped heads.
- Type: Philips screwdriver
- Tip sizes: #0 to #4
- Overall length: 98mm to 400mm
- Shank: round (D) or hex (H), by version
- Material: High Speed Tool Steel
| Type | Screwdrivers |
|---|
