Philips Screwdriver Bits
- Philips screwdriver bits with 1/4" or 5/16" hex shanks, for cross-head screws in bit holders and hex drivers.
- Five point sizes, #0 to #4, cover tiny electronics screws up to large cross-head screws on equipment.
- Lengths run from 30mm to 285mm, including long 275mm and 285mm bits for very deep screws.
- The 5/16" shank versions are offered for #1 to #4, giving a sturdier option for larger screws.
- Made of High Speed Tool Steel to keep the cross tip sharp and resist cam-out on repeated use.
Available Sizes (34) Show all 34 sizes Hide sizes
-
Size #0 · Shank 1/4" · Length 30mm
$1.43
-
Size #1 · Shank 1/4" · Length 30mm
$1.43
- Size #1 · Shank 1/4" · Length 56mm Out of stock Sold out
-
Size #1 · Shank 1/4" · Length 88mm
$5.89
-
Size #1 · Shank 1/4" · Length 125mm
$6.77
- Size #1 · Shank 1/4" · Length 160mm Out of stock Sold out
-
Size #1 · Shank 1/4" · Length 200mm
$10.19
-
Size #1 · Shank 5/16" · Length 30mm
$2.08
-
Size #2 · Shank 1/4" · Length 30mm
$1.25
-
Size #2 · Shank 1/4" · Length 56mm
$2.71
-
Size #2 · Shank 1/4" · Length 88mm
$5.89
-
Size #2 · Shank 1/4" · Length 125mm
$6.77
-
Size #2 · Shank 1/4" · Length 160mm
$8.60
-
Size #2 · Shank 1/4" · Length 200mm
$10.19
-
Size #2 · Shank 1/4" · Length 275mm
$14.02
-
Size #2 · Shank 5/16" · Length 30mm
$2.40
-
Size #2 · Shank 5/16" · Length 36mm
$3.22
-
Size #2 · Shank 5/16" · Length 56mm
$4.16
-
Size #3 · Shank 1/4" · Length 30mm
$1.33
- Size #3 · Shank 1/4" · Length 56mm Out of stock Sold out
-
Size #3 · Shank 1/4" · Length 88mm
$6.30
- Size #3 · Shank 1/4" · Length 125mm Out of stock Sold out
-
Size #3 · Shank 1/4" · Length 160mm
$9.19
- Size #3 · Shank 1/4" · Length 200mm Out of stock Sold out
-
Size #3 · Shank 5/16" · Length 30mm
$2.23
-
Size #3 · Shank 5/16" · Length 36mm
$3.91
-
Size #3 · Shank 5/16" · Length 56mm
$4.48
-
Size #3 · Shank 5/16" · Length 285mm
$22.99
-
Size #4 · Shank 5/16" · Length 30mm
$2.23
-
Size #4 · Shank 5/16" · Length 56mm
$4.48
- Size #4 · Shank 5/16" · Length 88mm Out of stock Sold out
- Size #4 · Shank 5/16" · Length 125mm Out of stock Sold out
-
Size #4 · Shank 5/16" · Length 160mm
$13.91
-
Size #4 · Shank 5/16" · Length 200mm
$16.70
Genius Tools Philips Screwdriver Bits
Genius Tools Philips Screwdriver Bits are separate bits with hex shanks, made for bit holders, hex drivers and socket bit adapters. They give you the right cross tip and length for each job without filling a drawer with full screwdrivers.
Sizes #0, #1, #2 and #3 are offered on a 1/4" hex shank, and #1 to #4 on a 5/16" hex shank. Lengths include 30mm, 36mm, 56mm, 88mm, 125mm, 160mm and 200mm, plus an extra-long #2 at 275mm on 1/4" shank and #3 at 285mm on 5/16" shank, 34 choices in total.
Each bit is made of High Speed Tool Steel. A hard, accurate cross tip holds in the screw recess better, so it slips less and protects screw heads. The same page lists the SB-221SP 21 piece slotted and Philips bit set with handgrip and holder.
Single bits make it easy to replace the sizes you wear out fastest, usually #2 and #3. The long versions are useful for reaching screws through holes and narrow channels, while the 30mm bits fit compact holders.
- Type: Philips screwdriver bit
- Sizes: #0 - #4
- Hex shank: 1/4" (#0 - #3), 5/16" (#1 - #4)
- Lengths: 30mm - 285mm
- Material: High Speed Tool Steel
| Type | Phillips Screwdriver Bits |
|---|
