Philips Head Drivers 1/2" Dr.
- Phillips head drivers for 1/2" drive tools apply strong, steady force to tight or large cross-head screws.
- Four tip sizes, #1 to #4, cover everything from small cross-head screws to large ones on machinery and vehicles.
- Each tip comes in 60mm and 76mm overall lengths, giving eight drivers to suit different clearances.
- The 1/2" drive lets you use a larger ratchet or breaker bar to free stubborn screws that resist hand tools.
- Made of Chrome Molybdenum Steel, giving a strong driver for heavier ratchet-driven work.
Available Sizes (8) Show all 8 sizes Hide sizes
-
Size #1 · Length 60mm
$13.34
-
Size #1 · Length 76mm
$19.12
-
Size #2 · Length 60mm
$15.34
-
Size #2 · Length 76mm
$19.12
-
Size #3 · Length 60mm
$17.23
-
Size #3 · Length 76mm
$21.49
-
Size #4 · Length 60mm
$17.23
- Size #4 · Length 76mm Out of stock Sold out
Genius Tools Philips Head Drivers 1/2" Dr.
When a cross-head screw is seized, a hand screwdriver often just cams out and damages the head. These Genius Tools Phillips head drivers fit 1/2" drive ratchets and breaker bars, letting you push firmly into the screw while applying much more turning force.
The series covers four tip sizes: #1, #2, #3 and #4. Each tip is offered in two overall lengths, 60mm and 76mm, for a total of eight drivers. The #3 and #4 sizes are well suited to the large cross-head screws on brake rotors, machine covers and equipment housings.
Choose the 60mm length when space is limited, and the 76mm length when the screw sits in a recess and needs extra reach.
All drivers are made of Chrome Molybdenum Steel to cope with the higher force a 1/2" drive tool can deliver. Keep them alongside your 1/2" drive sockets so tough cross-head screws can be handled with the same ratchet.
- Type: Phillips head driver
- Drive: 1/2"
- Tip sizes: #1, #2, #3, #4
- Lengths: 60mm, 76mm
- Material: Chrome Molybdenum Steel
| Type | Head Drivers |
|---|
