Philips Bit Sockets 3/8" Dr.
- Philips bit sockets for 3/8" drive ratchets, for driving cross-head screws with more torque than a hand screwdriver gives.
- Four point sizes, #1, #2, #3 and #4, cover medium cross-head screws through the large #4 size.
- Each size comes in 50mm, 110mm, 140mm, 180mm and 220mm overall lengths, 20 options in total.
- A ratchet and Philips bit socket help break loose stubborn screws while keeping steady pressure in the recess.
- Made of High Speed Tool Steel to keep the cross tip sharp and reduce cam-out from worn points.
Available Sizes (20) Show all 20 sizes Hide sizes
-
Size #1 · Length 50mm
$6.54
-
Size #1 · Length 110mm
$9.78
-
Size #1 · Length 140mm
$12.17
-
Size #1 · Length 180mm
$12.19
-
Size #1 · Length 220mm
$15.84
-
Size #2 · Length 50mm
$5.69
-
Size #2 · Length 110mm
$11.25
-
Size #2 · Length 140mm
$12.17
-
Size #2 · Length 180mm
$12.19
-
Size #2 · Length 220mm
$15.84
-
Size #3 · Length 50mm
$6.64
-
Size #3 · Length 110mm
$13.15
-
Size #3 · Length 140mm
$12.34
-
Size #3 · Length 180mm
$14.21
- Size #3 · Length 220mm Out of stock Sold out
-
Size #4 · Length 50mm
$7.25
-
Size #4 · Length 110mm
$10.37
-
Size #4 · Length 140mm
$12.65
-
Size #4 · Length 180mm
$17.14
-
Size #4 · Length 220mm
$19.74
Genius Tools Philips Bit Sockets 3/8" Dr.
These Genius Tools Philips Bit Sockets bring a cross-head tip to a 3/8" square drive. They are a good choice for heavier screws on vehicles, machinery and building fittings, where a hand screwdriver cannot give enough turning force.
The series offers the #1, #2, #3 and #4 sizes, each in 50mm, 110mm, 140mm, 180mm and 220mm overall lengths. The 50mm socket keeps the tool compact, while the longer bodies reach screws deep in housings or behind other parts without adding extensions.
Each bit socket is made of High Speed Tool Steel. Philips screws tend to push the bit out under load, so a hard, well-formed tip and firm pressure from the ratchet help it stay seated and protect the screw head from damage.
Mechanics often keep one length of each size in the main toolbox and add the 180mm or 220mm versions for hard-to-reach screws. Using a socket also lets you set a torque wrench on the drive when a screw needs a controlled tightening value.
- Type: Philips bit socket
- Drive: 3/8"
- Sizes: #1, #2, #3, #4
- Lengths: 50mm, 110mm, 140mm, 180mm, 220mm
- Material: High Speed Tool Steel
| Type | Slotted & Phillips Bit Sockets |
|---|
