Offset Screwdrivers
- Offset screwdrivers have tips set at an angle to the body, for screws with no room above them for a normal driver.
- Three slotted sizes, 1.0 x 6.0mm, 1.2 x 8.0mm and 1.6 x 9.0mm, for small to larger flat-head screws.
- Two Philips versions, #1 - #2 and #3 - #4, each carrying two point sizes on one compact tool.
- Overall lengths of 125mm, 150mm and 175mm, with the larger sizes longer for extra turning leverage.
- Flat, compact shape slips behind panels, under fixtures and into cabinets where a straight screwdriver cannot fit.
Available Sizes (5) Show all 5 sizes Hide sizes
-
Size 1.0 x 6.0mm
$8.94
-
Size 1.2 x 8.0mm
$8.94
-
Size 1.6 x 9.0mm
$8.94
-
Size #1 - #2
$7.77
-
Size #3 - #4
$8.94
Genius Tools Offset Screwdrivers
Genius Tools Offset Screwdrivers solve the problem of screws you can see but cannot get a screwdriver onto. The tip is turned at an angle to the body, so the tool lies flat and works in the narrow gap above a screw, behind a panel or inside a cabinet.
Five versions make up the series. The slotted drivers come in 1.0 x 6.0mm at 125mm long, 1.2 x 8.0mm at 150mm and 1.6 x 9.0mm at 175mm. For cross-head screws there is a #1 - #2 Philips driver at 125mm and a #3 - #4 Philips driver at 175mm, each with two point sizes on the one tool.
Turning an offset screwdriver is done in short strokes, flipping it end to end as needed, and the body works as a lever so you can apply good torque even with very little space.
They are useful for furniture and appliance repair, electrical fittings, vehicle interiors and machinery service. Keep a slotted and a Philips version in your kit for those jobs where nothing else will reach.
- Type: offset screwdriver
- Slotted: 1.0 x 6.0mm, 1.2 x 8.0mm, 1.6 x 9.0mm
- Philips: #1 - #2, #3 - #4
- Overall length: 125mm, 150mm, 175mm
| Type | Key Wrench Sets & Offset Screwdrivers |
|---|
