Metric & SAE Open End Wrenches - Matt Finish
- Double open end wrenches with a different size at each end, quick to slip onto nuts from the side.
- Twenty-two size pairs: 13 metric from 6 x 7mm to 30 x 32mm and nine SAE from 1/4 x 5/16 to 1-1/16 x 1-1/4 inch.
- Heads angled at 15 degrees let you flip the wrench for a new grip when swing room is limited.
- Lengths from 122mm to 302mm, matched to each size pair for comfortable control and leverage.
- Made of Chrome Vanadium Steel with a practical matt finish for everyday workshop use.
Available Sizes (22) Show all 22 sizes Hide sizes
-
Size 6 x 7mm
$5.04
-
Size 1/4" x 5/16"
$5.79
-
Size 8 x 9mm
$5.33
-
Size 3/8" x 7/16"
$6.80
-
Size 10 x 11mm
$5.91
-
Size 12 x 13mm
$8.15
-
Size 1/2" x 9/16"
$9.52
-
Size 14 x 15mm
$9.85
-
Size 5/8" x 11/16"
$11.58
-
Size 16 x 17mm
$10.07
-
Size 18 x 19mm
$10.95
-
Size 3/4" x 7/8"
$15.63
-
Size 20 x 22mm
$15.63
-
Size 13/16" x 7/8"
$15.38
-
Size 21 x 23mm
$15.38
-
Size 15/16" x 1"
$21.08
-
Size 24 x 26mm
$18.33
-
Size 25 x 28mm
$25.17
- Size 1" x 1-1/8" Out of stock Sold out
-
Size 1-1/16" x 1-1/4"
$27.88
-
Size 27 x 30mm
$24.24
-
Size 30 x 32mm
$27.88
Genius Tools Metric & SAE Open End Wrenches - Matt Finish
Genius Tools Metric & SAE Open End Wrenches - Matt Finish are classic double open end wrenches. The open jaws slide onto a nut or bolt from the side, which makes them quick to use and the right choice for fasteners on pipes, rods and lines where a ring cannot go over the top.
The series offers 22 wrenches. Metric pairs are 6 x 7, 8 x 9, 10 x 11, 12 x 13, 14 x 15, 16 x 17, 18 x 19, 20 x 22, 21 x 23, 24 x 26, 25 x 28, 27 x 30 and 30 x 32mm. SAE pairs run from 1/4 x 5/16 inch to 1-1/16 x 1-1/4 inch. Lengths range from 122mm to 302mm.
Each head is set at 15 degrees. By turning the wrench over after each swing you can work a fastener through a small arc, a big help in crowded spaces.
All wrenches are made of Chrome Vanadium Steel with a matt finish, offering two sizes per tool to keep your toolbox compact.
- Type: double open end wrench
- Metric pairs: 6 x 7mm to 30 x 32mm (13)
- SAE pairs: 1/4" x 5/16" to 1-1/16" x 1-1/4" (9)
- Length: 122mm to 302mm; 15 degree head; matt finish
- Material: Chrome Vanadium Steel
| Type | Open End Wrenches |
|---|
