Metric & SAE Hex Head Hand Sockets 1/4" Dr.
- Hex head bit sockets with a 1/4 inch drive for turning socket-head cap screws and other internal hex fasteners.
- Sixteen sizes in one series: eight metric from 3mm to 10mm and eight SAE from 1/8 inch to 3/8 inch.
- Using a ratchet instead of an L-key gives faster turning and more leverage on tight hex screws.
- Compact 25mm length with a 12mm body reaches hex screws in tight corners of machines and vehicles.
- Made of Chrome Vanadium Steel for a strong hex tip that resists wear.
Available Sizes (16) Show all 16 sizes Hide sizes
- Size 3mm Out of stock Sold out
-
Size 1/8"
$3.68
-
Size 5/32"
$3.68
-
Size 4mm
$3.68
-
Size 3/16"
$3.68
-
Size 5mm
$3.68
-
Size 7/32"
$3.68
-
Size 6mm
$3.68
-
Size 1/4"
$3.68
-
Size 7mm
$3.68
-
Size 9/32"
$4.48
-
Size 5/16"
$4.48
-
Size 8mm
$3.68
-
Size 9mm
$3.68
-
Size 3/8"
$4.48
-
Size 10mm
$3.68
Genius Tools Metric & SAE Hex Head Hand Sockets 1/4" Dr.
Genius Tools Metric & SAE Hex Head Hand Sockets with a 1/4 inch drive fit internal hex fasteners such as socket-head cap screws and set screws. Fitting a hex bit to a ratchet makes these screws much quicker to run in and out than with an L-shaped key.
The series covers both measuring systems. Metric sizes are 3, 4, 5, 6, 7, 8, 9 and 10mm. SAE sizes are 1/8, 5/32, 3/16, 7/32, 1/4, 9/32, 5/16 and 3/8 inch, sixteen sizes in all.
Each socket is 25mm long with a 12mm body diameter, keeping the tool compact for fasteners in machine guards, bicycle and motorcycle parts, furniture and automotive components. Using the exact size helps keep the hex recess from rounding.
All sockets are made of Chrome Vanadium Steel, a strong alloy used widely in hand tools. They fit any 1/4 inch drive ratchet, spinner or extension.
- Type: hex (Allen) bit socket
- Drive: 1/4" square
- Sizes: 3mm to 10mm (8 sizes), 1/8" to 3/8" (8 sizes)
- Length: 25mm; body 12mm
- Material: Chrome Vanadium Steel
| Type | Hand Sockets |
|---|
