Metric & SAE Flex Head Combination Ratcheting Wrenches - Mirror Finish
- Flex head pivots the ratcheting box end to the angle you need, reaching fasteners that a fixed head cannot get onto squarely.
- Sixteen sizes in total: eight metric sizes from 8mm to 19mm and eight SAE sizes from 5/16 inch to 3/4 inch.
- Ratcheting box end keeps turning the fastener on the return stroke, so you never have to lift and reset the wrench.
- Open end on the opposite side gives you a second way to grab a nut where the box end will not slide on.
- Lengths from 136mm on the small sizes to 250mm on 19mm and 3/4 inch, with an easy-to-clean mirror finish.
Available Sizes (16) Show all 16 sizes Hide sizes
- Size 5/16" Out of stock Sold out
-
Size 8mm
$30.62
- Size 3/8" Out of stock Sold out
-
Size 10mm
$32.65
- Size 7/16" Out of stock Sold out
-
Size 12mm
$35.12
- Size 1/2" Out of stock Sold out
-
Size 13mm
$36.58
-
Size 14mm
$37.85
- Size 9/16" Out of stock Sold out
-
Size 15mm
$39.68
- Size 5/8" Out of stock Sold out
-
Size 17mm
$44.76
- Size 11/16" Out of stock Sold out
-
Size 19mm
$47.86
- Size 3/4" Out of stock Sold out
Genius Tools Flex Head Combination Ratcheting Wrenches, Mirror
Genius Tools Flex Head Combination Ratcheting Wrenches add a pivoting head to the ratcheting box end. By tilting the head you can approach a bolt from an awkward angle, work around hoses and brackets, or keep your hand clear of hot or sharp parts while the ratchet does the turning.
The series focuses on the sizes used most often. Metric wrenches come in 8, 10, 12, 13, 14, 15, 17 and 19mm. SAE wrenches come in 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16 and 3/4 inch, so both metric and inch vehicles and equipment are covered.
Each wrench also has an open end for quick work on exposed nuts. Lengths range from 136mm on the 8mm and 5/16 inch wrenches to 250mm on the 19mm and 3/4 inch wrenches, giving more leverage as the fastener size increases.
The mirror finish keeps grease from settling into the surface and makes the wrenches easy to wipe down at the end of the day.
- Type: flex head combination ratcheting wrench
- Metric sizes: 8mm - 19mm (8 sizes)
- SAE sizes: 5/16" - 3/4" (8 sizes)
- Lengths: 136mm - 250mm
- Finish: mirror
| Type | Ratcheting Combination Wrenches |
|---|
