Metric & SAE Double Ended Offset Ring Wrenches - Mirror Finish
- Double ended offset ring wrenches have a closed ring at each end, each a different size, for a secure all-round grip.
- Twenty-one size pairs: 13 metric from 6 x 7mm to 30 x 32mm and 8 SAE from 1/4 x 5/16 to 1-1/8 x 1-1/4 inch.
- The offset heads lift the handle above the work, giving hand clearance over flat surfaces and raised parts.
- Lengths from 167mm to 360mm, scaled to each size pair for the right balance of reach and leverage.
- Made of Chrome Vanadium Steel with a polished mirror finish that resists grime and cleans up quickly.
Available Sizes (21) Show all 21 sizes Hide sizes
-
Size 6 x 7mm
$14.80
-
Size 1/4" x 5/16"
$14.50
-
Size 8 x 9mm
$18.21
-
Size 3/8" x 7/16"
$17.01
-
Size 10 x 11mm
$17.01
-
Size 12 x 13mm
$18.94
-
Size 1/2" x 9/16"
$21.45
-
Size 14 x 15mm
$20.72
-
Size 5/8" x 11/16"
$28.91
-
Size 16 x 17mm
$27.36
-
Size 18 x 19mm
$37.42
-
Size 3/4" x 13/16"
$38.26
-
Size 20 x 22mm
$35.06
-
Size 21 x 23mm
$40.32
-
Size 7/8" x 15/16"
$41.66
-
Size 24 x 26mm
$41.12
-
Size 25 x 28mm
$44.36
-
Size 1" x 1-1/16"
$51.02
-
Size 27 x 29mm
$54.13
-
Size 1-1/8" x 1-1/4"
$68.87
-
Size 30 x 32mm
$59.60
Genius Tools Metric & SAE Double Ended Offset Ring Wrenches - Mirror Finish
Genius Tools Metric & SAE Double Ended Offset Ring Wrenches - Mirror Finish give you two closed ring sizes on one tool. A ring grips the fastener on all sides, so it is the safer choice for breaking tight nuts loose and for final tightening without slipping.
The series includes 21 wrenches. Metric pairs are 6 x 7, 8 x 9, 10 x 11, 12 x 13, 14 x 15, 16 x 17, 18 x 19, 20 x 22, 21 x 23, 24 x 26, 25 x 28, 27 x 29 and 30 x 32mm. SAE pairs run from 1/4 x 5/16 inch through 1-1/8 x 1-1/4 inch. Lengths range from 167mm to 360mm.
The heads are offset from the handle, as the catalog drawing shows with its 75 degree angles. This raises the handle above the work so your hand clears flanges, covers and recessed fasteners.
Each wrench is made of Chrome Vanadium Steel and finished to a bright mirror polish that is easy to keep clean. A matt finish version is also available.
- Type: double ended offset ring wrench
- Metric pairs: 6 x 7mm to 30 x 32mm (13)
- SAE pairs: 1/4" x 5/16" to 1-1/8" x 1-1/4" (8)
- Length: 167mm to 360mm; mirror finish
- Material: Chrome Vanadium Steel
| Type | Double End Offset Box End Wrenches |
|---|
