Metric & SAE Double Ended Offset Ring Wrenches - Matt Finish
- Matt finish offset ring wrenches with a closed ring at both ends, two sizes per tool, for a firm, slip-resistant grip.
- Thirteen metric pairs from 6 x 7mm to 30 x 32mm and eight SAE pairs from 1/4 x 5/16 to 1-1/8 x 1-1/4 inch.
- Offset ring heads keep the handle raised above the job, so you can reach fasteners on flat or crowded surfaces.
- Wrench lengths run from 165mm on the smallest pair to 370mm on the largest for good leverage.
- Made of Chrome Vanadium Steel with a practical matt finish for hard-working shop use.
Available Sizes (21) Show all 21 sizes Hide sizes
-
Size 6 x 7mm
$13.93
-
Size 1/4" x 5/16"
$13.93
-
Size 8 x 9mm
$14.63
-
Size 3/8" x 7/16"
$15.07
-
Size 10 x 11mm
$17.33
-
Size 12 x 13mm
$18.21
-
Size 1/2" x 9/16"
$15.83
-
Size 14 x 15mm
$20.58
-
Size 5/8" x 11/16"
$21.01
-
Size 16 x 17mm
$24.17
-
Size 18 x 19mm
$23.97
-
Size 3/4" x 13/16"
$25.88
-
Size 20 x 22mm
$25.88
-
Size 21 x 23mm
$36.40
-
Size 7/8" x 15/16"
$36.40
-
Size 24 x 26mm
$40.32
-
Size 25 x 28mm
$47.61
-
Size 1" x 1-1/16"
$47.61
-
Size 27 x 29mm
$50.51
-
Size 1-1/8" x 1-1/4"
$52.91
-
Size 30 x 32mm
$52.91
Genius Tools Metric & SAE Double Ended Offset Ring Wrenches - Matt Finish
Genius Tools Metric & SAE Double Ended Offset Ring Wrenches - Matt Finish are workhorse box wrenches for mechanics and maintenance staff. With a closed ring on each end, they hold the fastener all the way round, reducing slipping and rounded corners when a nut is seized or needs firm tightening.
Twenty-one wrenches make up the series. Metric pairs are 6 x 7, 8 x 9, 10 x 11, 12 x 13, 14 x 15, 16 x 17, 18 x 19, 20 x 22, 21 x 23, 24 x 26, 25 x 28, 27 x 29 and 30 x 32mm. The SAE pairs run from 1/4 x 5/16 inch to 1-1/8 x 1-1/4 inch. Lengths step up from 165mm to 370mm.
Each head is offset from the handle, which lets you work on fasteners sitting flat against a surface or surrounded by other parts while keeping your fingers clear.
The wrenches are made of Chrome Vanadium Steel with a matt finish. Prefer a polished look? The same size pairs are available in mirror finish.
- Type: double ended offset ring wrench
- Metric pairs: 6 x 7mm to 30 x 32mm (13)
- SAE pairs: 1/4" x 5/16" to 1-1/8" x 1-1/4" (8)
- Length: 165mm to 370mm; matt finish
- Material: Chrome Vanadium Steel
| Type | Double End Offset Box End Wrenches |
|---|
