Metric & SAE Combination Ratcheting Wrenches - Mirror Finish
- Combination ratcheting wrenches add a ratcheting box end, so you keep turning a fastener without lifting the wrench off.
- Thirty-six sizes: 21 metric from 8mm to 32mm and 15 SAE from 5/16 inch to 1-1/4 inch.
- The open end on the other side runs nuts quickly or reaches fasteners where the ring cannot fit over.
- Lengths from 136mm to 425mm with a 15 degree head angle for leverage and clearance in tight spaces.
- Made of Chrome Vanadium Steel and finished in a polished mirror finish for easy cleaning.
Available Sizes (36) Show all 36 sizes Hide sizes
-
Size 5/16"
$19.13
-
Size 8mm
$17.01
-
Size 3/8"
$18.06
-
Size 10mm
$18.06
-
Size 11mm
$18.80
- Size 7/16" Out of stock Sold out
-
Size 12mm
$22.78
- Size 1/2" Out of stock Sold out
-
Size 13mm
$20.55
-
Size 14mm
$21.88
-
Size 9/16"
$25.17
-
Size 15mm
$23.20
-
Size 5/8"
$24.40
-
Size 16mm
$24.40
-
Size 17mm
$26.18
-
Size 11/16"
$30.11
-
Size 18mm
$30.61
-
Size 19mm
$32.15
-
Size 3/4"
$27.96
-
Size 13/16"
$42.16
-
Size 21mm
$48.48
-
Size 22mm
$48.48
-
Size 7/8"
$42.16
-
Size 23mm
$49.31
-
Size 15/16"
$57.83
-
Size 24mm
$57.83
-
Size 25mm
$51.76
-
Size 1"
$51.76
-
Size 26mm
$61.23
-
Size 1-1/16"
$69.53
-
Size 27mm
$69.53
-
Size 28mm
$72.47
-
Size 1-1/8"
$88.74
- Size 30mm Out of stock Sold out
-
Size 1-1/4"
$102.05
-
Size 32mm
$88.74
Genius Tools Metric & SAE Combination Ratcheting Wrenches - Mirror Finish
Genius Tools Metric & SAE Combination Ratcheting Wrenches - Mirror Finish speed up jobs with many turns. The box end ratchets, so you can work a nut or bolt back and forth in short swings without taking the wrench off and refitting it each time, which is a real time saver in confined spaces.
The series covers 36 sizes. Metric wrenches are 8, 10 to 19, 21 to 28, 30 and 32mm. SAE wrenches run from 5/16 inch through 1-1/8 inch in sixteenth-inch steps, plus 1-1/4 inch. Lengths increase from 136mm on the small sizes to 425mm on the largest.
The opposite end is a standard open end, handy for quickly spinning fasteners or for reaching nuts on lines and studs where a ring cannot pass. A 15 degree angle is printed for the wrench head.
All wrenches are made of Chrome Vanadium Steel and finished to a mirror polish. For the tightest spots, see the stubby ratcheting versions.
- Type: combination ratcheting wrench
- Metric sizes: 8mm to 32mm (21 sizes)
- SAE sizes: 5/16" to 1-1/4" (15 sizes)
- Length: 136mm to 425mm; mirror finish
- Material: Chrome Vanadium Steel
| Type | Ratcheting Combination Wrenches |
|---|
