Metric Impact Sockets 1/2" Dr. (Cr-Mo)
- Standard-depth metric impact sockets for 1/2 inch drive impact wrenches, built for removing and fitting nuts and bolts quickly.
- Broad choice of 34 sizes in single millimetre steps from 8mm up to 41mm, so you can match nearly every metric fastener.
- Compact overall lengths between 38mm and 55mm keep the wrench close to the work in tight engine bays and under vehicles.
- 6 point design grips the flats of the hex, transferring impact force without rounding off the corners of worn fasteners.
- Made of Chrome Molybdenum steel, a material commonly chosen for impact sockets because it handles the repeated hammering of an impact wrench.
Available Sizes (34) Show all 34 sizes Hide sizes
-
Size 8mm
$6.20
-
Size 9mm
$6.20
-
Size 10mm
$7.13
-
Size 11mm
$7.13
-
Size 12mm
$7.13
-
Size 13mm
$6.20
-
Size 14mm
$7.13
-
Size 15mm
$8.62
-
Size 16mm
$8.62
-
Size 17mm
$8.62
-
Size 18mm
$8.62
-
Size 19mm
$8.62
-
Size 20mm
$9.12
-
Size 21mm
$9.12
-
Size 22mm
$9.45
-
Size 23mm
$9.93
-
Size 24mm
$10.42
-
Size 25mm
$13.07
-
Size 26mm
$13.07
-
Size 27mm
$13.07
- Size 28mm Out of stock Sold out
-
Size 29mm
$15.48
-
Size 30mm
$16.06
-
Size 31mm
$17.55
-
Size 32mm
$17.55
-
Size 33mm
$19.14
-
Size 34mm
$19.14
-
Size 35mm
$20.64
-
Size 36mm
$22.01
-
Size 37mm
$22.01
-
Size 38mm
$19.14
-
Size 39mm
$25.78
-
Size 40mm
$27.79
-
Size 41mm
$29.77
Genius Tools Metric Impact Sockets 1/2" Dr. (Cr-Mo)
Genius Tools Metric Impact Sockets in 1/2 inch drive are everyday workhorses for automotive, truck and machinery service. They are designed to be driven by an impact wrench, the tool most shops reach for when wheel nuts, suspension bolts and seized fasteners need to come off fast.
The series runs from 8mm to 41mm in 1mm steps, 34 sizes in all, so you can replace a single lost size or build out a complete metric range. Socket length grows with the size, from 38mm on the smallest to 55mm on the largest, keeping each one as short as practical for good access and control.
Every socket has a 6 point opening that holds the fastener on its flats, which is the better choice for high-torque impact use. The sockets are made of Chrome Molybdenum steel and fit any 1/2 inch square drive impact wrench, extension or universal joint.
- Type: impact socket, 6 point, standard depth
- Drive: 1/2" square
- Sizes: 8mm to 41mm (34 sizes)
- Length: 38mm to 55mm
- Material: Chrome Molybdenum Steel
| Type | Impact Sockets |
|---|---|
| Point | 6 Point |
