Metric Hand Sockets (12-Point) 1/2" Dr.
- Standard 1/2 inch drive metric sockets with a 12-point opening, for fast positioning on hex fasteners in awkward spots.
- Thirty-four metric sizes from 8mm to 41mm in 1mm steps, a complete range from small bolts to large hub nuts.
- Twelve engagement positions let the socket drop onto a nut at many angles, useful when the ratchet swing is limited.
- Lengths step up from 38mm on the smaller sizes to 55mm on the 40mm and 41mm sockets.
- Made of Chrome Vanadium Steel, the material printed for the Genius Tools 1/2 inch drive 12-point socket page.
Available Sizes (34) Show all 34 sizes Hide sizes
-
Size 8mm
$4.43
-
Size 9mm
$4.43
-
Size 10mm
$5.10
-
Size 11mm
$5.10
-
Size 12mm
$4.43
-
Size 13mm
$4.43
-
Size 14mm
$5.10
-
Size 15mm
$5.35
-
Size 16mm
$5.86
-
Size 17mm
$6.21
-
Size 18mm
$6.54
-
Size 19mm
$6.90
-
Size 20mm
$7.23
-
Size 21mm
$7.65
-
Size 22mm
$7.99
-
Size 23mm
$8.33
-
Size 24mm
$8.68
-
Size 25mm
$8.93
-
Size 26mm
$9.45
-
Size 27mm
$9.85
-
Size 28mm
$11.22
-
Size 29mm
$11.64
-
Size 30mm
$10.35
-
Size 31mm
$12.84
-
Size 32mm
$11.17
-
Size 33mm
$17.01
-
Size 34mm
$17.01
-
Size 35mm
$17.01
-
Size 36mm
$17.01
-
Size 37mm
$17.01
-
Size 38mm
$17.01
-
Size 39mm
$19.92
-
Size 40mm
$21.43
-
Size 41mm
$22.96
Genius Tools Metric Hand Sockets (12-Point) 1/2" Dr.
Genius Tools Metric Hand Sockets (12-Point) 1/2 inch Dr. are standard-depth sockets with a 12-point opening for 1/2 inch drive tools. The extra points make it quicker to engage a hex nut or bolt, because the socket lines up every 30 degrees instead of every 60.
That convenience pays off when you cannot see the fastener well or can only move the ratchet a short distance, such as behind engine components or along a crowded frame rail.
The series covers thirty-four sizes from 8mm through 41mm without gaps. Socket lengths run from 38mm on the small sizes to 55mm on the largest, keeping the profile compact for a 1/2 inch drive socket.
Each socket is made of Chrome Vanadium Steel. Choose the 12-point version for speed and access, and the 6-point version of the same series when you need maximum grip on a tight fastener. The large sizes are handy for hub, axle and heavy machinery nuts.
- Type: 12-point standard hand socket, metric
- Drive: 1/2" square
- Sizes: 8mm - 41mm (34 sizes)
- Length: 38mm - 55mm
- Material: Chrome Vanadium Steel
| Type | Hand Sockets |
|---|---|
| Point | 12 Point |
