Metric Deep Hand Sockets 3/8" Dr.
- Metric deep hand sockets with a 3/8 inch drive for nuts on long bolts, studs and exhaust or suspension hardware.
- Seventeen sizes from 6mm to 22mm in single-millimetre steps, so no common metric size in the range is missing.
- Uniform 63mm length reaches over protruding threads and into recesses to engage the full height of the nut.
- 6-point opening drives the fastener on its flats, helping protect corners on tight or corroded nuts.
- Matches the standard-length 3/8 inch metric series size for size for a complete shallow and deep range.
Available Sizes (17) Show all 17 sizes Hide sizes
Genius Tools Metric Deep Hand Sockets 3/8" Dr.
Genius Tools Metric Deep Hand Sockets with a 3/8 inch drive are made for the many places where a nut sits on a long stud or bolt: exhaust flanges, suspension mounts, brackets and threaded rod. A standard socket would bottom out on the thread, but these deep sockets slide over it and seat on the nut.
Seventeen sizes are offered, every whole millimetre from 6mm to 22mm. That is the same range as the standard-length 3/8 inch metric sockets, so you can pair each shallow socket with its deep partner.
All sockets are 63mm long. The 6-point opening contacts the flats of the fastener, spreading force evenly and reducing the risk of rounding fasteners that are tight or rusted.
Use them with any 3/8 inch drive ratchet, breaker bar or extension for automotive, motorcycle and general mechanical work. Buy single sizes to replace a missing socket, or collect the full range to complete a professional 3/8 inch drive metric kit.
- Type: 6-point deep hand socket, metric
- Drive: 3/8" square
- Sizes: 6mm to 22mm (17 sizes)
- Length: 63mm
| Type | Hand Sockets |
|---|---|
| Point | 6 Point |
