Impact Extension Bars 3/8" Dr. (Cr-Mo)
- Chrome Molybdenum Steel impact extension bars in 3/8 inch drive extend your reach to deep or hidden fasteners.
- Seven lengths from 50mm to 300mm: 50, 75, 125, 150, 200, 250 and 300mm.
- Every length is offered with either a pin hole or a steel ball, for 14 versions to match how you retain sockets.
- Pin hole bars take a retaining pin and ring to lock the socket on, while steel ball bars allow quick socket changes.
- Use between a 3/8 inch impact wrench and socket to reach past brackets, wheels and engine components.
Available Lengths (14) Show all 14 lengths Hide lengths
- Length 50mm w/Pin Hole Out of stock Sold out
-
Length 50mm w/Steel Ball
$5.38
-
Length 75mm w/Pin Hole
$4.67
-
Length 75mm w/Steel Ball
$5.38
-
Length 125mm w/Pin Hole
$8.98
-
Length 125mm w/Steel Ball
$8.98
- Length 150mm w/Pin Hole Out of stock Sold out
-
Length 150mm w/Steel Ball
$12.68
-
Length 200mm w/Pin Hole
$14.92
-
Length 200mm w/Steel Ball
$14.92
- Length 250mm w/Pin Hole Out of stock Sold out
-
Length 250mm w/Steel Ball
$17.91
- Length 300mm w/Pin Hole Out of stock Sold out
-
Length 300mm w/Steel Ball
$20.89
Genius Tools Impact Extension Bars 3/8" Dr. (Cr-Mo)
Genius Tools Impact Extension Bars in 3/8 inch drive are made of Chrome Molybdenum Steel to stand up to regular use with impact wrenches. Fit one between the tool and the socket to reach fasteners recessed in engine bays, wheel wells or machinery housings.
Choose from seven lengths: 50mm, 75mm, 125mm, 150mm, 200mm, 250mm and 300mm. A short bar keeps the setup stiff and close to the work, while the longer bars reach past obstacles so you do not have to strip parts away to get at a bolt.
Each length comes in two styles. The pin hole version accepts a retaining pin and ring, a method many technicians use to lock the socket on for heavy impact work. The steel ball version holds the socket with a spring-loaded ball for quicker socket swaps.
With 14 versions in the series, you can match both the reach you need and the retaining method your sockets use.
- Type: impact extension bar
- Drive: 3/8"
- Lengths: 50mm - 300mm (7 lengths)
- Retention: pin hole or steel ball
- Material: Chrome Molybdenum Steel
| Type | Accessories |
|---|
