Impact Extension Bars 1/2" Dr. (Cr-Mo)
- 1/2 inch drive impact extension bars that move the impact wrench away from the fastener to reach deep or blocked spots.
- Seven lengths: 50mm, 75mm, 125mm, 150mm, 200mm, 250mm and 300mm, from a short stub to a long reach bar.
- Every length comes with a pin hole end for locking the socket on, or a steel ball end for fast socket changes.
- Lets the wrench body clear wheels, fenders, frames and engine parts while the socket stays square on the nut.
- Made of Chrome Molybdenum steel for use with impact wrenches and impact sockets.
Available Lengths (14) Show all 14 lengths Hide lengths
- Length 50mm w/Pin Hole Out of stock Sold out
-
Length 50mm w/Steel Ball
$11.73
-
Length 75mm w/Pin Hole
$11.72
-
Length 75mm w/Steel Ball
$11.73
-
Length 125mm w/Pin Hole
$13.50
-
Length 125mm w/Steel Ball
$13.50
-
Length 150mm w/Pin Hole
$13.21
-
Length 150mm w/Steel Ball
$13.21
-
Length 200mm w/Pin Hole
$19.84
-
Length 200mm w/Steel Ball
$19.84
-
Length 250mm w/Pin Hole
$20.54
-
Length 250mm w/Steel Ball
$23.62
- Length 300mm w/Pin Hole Out of stock Sold out
-
Length 300mm w/Steel Ball
$28.11
Genius Tools Impact Extension Bars 1/2" Dr. (Cr-Mo)
An impact extension bar is one of the most used accessories in any impact tool kit. Genius Tools 1/2 inch drive Impact Extension Bars place distance between the wrench and the socket, so you can reach fasteners behind wheels, deep in engine bays or through openings in a frame.
Seven lengths are available: 50mm, 75mm, 125mm, 150mm, 200mm, 250mm and 300mm. Short bars keep the setup stiff and compact, while the longer bars reach well into the work area.
Each length is offered in two styles. The pin hole style takes a retaining pin for a secure lock on the socket, ideal for heavy impact work. The steel ball style holds the socket with a detent ball for quick on and off. All bars are made of Chrome Molybdenum steel and have 1/2 inch square drive ends.
Choose the length that matches the reach you need, then the retention type that suits how you work. Using the shortest bar that reaches keeps the setup stiff and gives the best transfer of impact force to the fastener.
- Type: impact extension bar
- Drive: 1/2" square
- Lengths: 50mm to 300mm (7 lengths)
- Retention: pin hole or steel ball
- Material: Chrome Molybdenum Steel
| Type | Accessories |
|---|
