Forged Retaining Ring Pliers
- Forged retaining ring pliers for installing and removing snap rings on shafts and inside bores.
- External versions open the ring for shafts, internal versions close the ring for bores and housings.
- Straight tip and 90 degree bent tip versions to reach rings face-on or from the side.
- Four lengths, 5, 7, 9 and 12 inch, with tip diameters of 1.3, 1.8, 2.3 and 3.2mm.
- Sixteen combinations let you match length, tip size, type and angle to the ring in front of you.
Available Lengths (16) Show all 16 lengths Hide lengths
-
Length 125mm (5") · Product Type External, 90°
$34.87
-
Length 125mm (5") · Product Type Internal, 90°
$30.32
-
Length 125mm (5") · Product Type External, Straight
$34.87
-
Length 125mm (5") · Product Type Internal, Straight
$30.32
-
Length 175mm (7") · Product Type External, 90°
$32.53
-
Length 175mm (7") · Product Type Internal, 90°
$32.53
-
Length 175mm (7") · Product Type External, Straight
$32.53
-
Length 175mm (7") · Product Type Internal, Straight
$32.53
-
Length 225mm (9") · Product Type External, 90°
$50.56
-
Length 225mm (9") · Product Type Internal, 90°
$58.14
-
Length 225mm (9") · Product Type External, Straight
$50.56
- Length 225mm (9") · Product Type Internal, Straight Out of stock Sold out
-
Length 300mm (12") · Product Type External, 90°
$69.73
-
Length 300mm (12") · Product Type Internal, 90°
$60.64
-
Length 300mm (12") · Product Type External, Straight
$60.64
-
Length 300mm (12") · Product Type Internal, Straight
$69.73
Genius Tools Forged Retaining Ring Pliers
Genius Tools Forged Retaining Ring Pliers are made for snap rings, the spring clips that hold bearings, gears and pulleys in place. Their tips fit the holes in the ring ears so you can open or close the ring evenly and lift it in or out of its groove.
Two types are offered. External pliers open when you squeeze, spreading rings that sit on a shaft. Internal pliers close when you squeeze, compressing rings that sit inside a bore. Each type comes with straight tips or 90 degree bent tips, the bent version helping when you must work from the side or behind a part.
Every combination is offered in four sizes: 125mm (5 inch) with 1.3mm tips, 175mm (7 inch) with 1.8mm tips, 225mm (9 inch) with 2.3mm tips and 300mm (12 inch) with 3.2mm tips, sixteen pliers in total.
Choose tip size by the ring ear holes and length by the ring size and available room. The 7 inch versions are also sold together as the catalog RP-5504 4 piece set.
- Type: forged retaining ring pliers
- Types: external, internal; straight or 90 degree tip
- Lengths: 125mm (5 inch) to 300mm (12 inch)
- Tip diameter: 1.3mm, 1.8mm, 2.3mm, 3.2mm
| Type | Pliers w/ Double Color Soft Handle |
|---|
