Extension Bars 3/8" Dr.
- Straight 3/8 inch drive extension bars add reach between the ratchet and socket for fasteners buried deep inside an assembly.
- Eight lengths are available: 25mm, 50mm, 75mm, 125mm, 150mm, 200mm, 250mm and 300mm.
- Short extensions add just enough clearance for the ratchet handle, while the long bars reach down into engine bays and through frames.
- Pick one length to fill a gap or several to build a complete range for different job depths.
- Made of Chrome Vanadium Steel for a strong, straight connection when turning fasteners through an extension.
Available Lengths (8) Show all 8 lengths Hide lengths
-
Length 25mm
$3.56
-
Length 50mm
$4.44
-
Length 75mm
$4.50
-
Length 125mm
$6.21
-
Length 150mm
$7.14
-
Length 200mm
$10.50
-
Length 250mm
$15.32
-
Length 300mm
$17.88
Genius Tools Extension Bars 3/8" Dr.
Genius Tools Extension Bars 3/8 inch Dr. sit between a 3/8 inch drive ratchet or handle and the socket. They move the ratchet away from the fastener so you have room to swing it, and they reach bolts that are recessed or surrounded by other parts.
The series spans eight lengths. The 25mm and 50mm bars are for when you only need to lift the ratchet clear of an obstruction. The 75mm, 125mm and 150mm bars are the everyday middle range, and the 200mm, 250mm and 300mm bars reach deep into engine compartments, wheel wells and machinery.
Having several lengths on hand lets you match the extension to the job instead of stacking short bars together, which keeps the drive firmer and easier to control.
Each extension bar is made of Chrome Vanadium Steel. They fit any standard 3/8 inch square drive ratchet, breaker bar or speed handle and accept 3/8 inch drive sockets.
- Type: straight extension bar
- Drive: 3/8" square
- Lengths: 25mm - 300mm (8 lengths)
- Material: Chrome Vanadium Steel
| Type | Accessories |
|---|
