E-Star Deep Impact Sockets 1/2" Dr.
- Deep E-Star impact sockets in 1/2 inch drive for external star bolts that sit low or have long threads behind the head.
- Fourteen sizes from E-8 through E-32, the same size range as the standard-depth E-Star series.
- 78mm deep length gives extra reach into recesses and past obstructions where a short socket cannot seat.
- Star-shaped opening engages each lobe of the bolt head for a secure fit and reduced risk of stripping.
- Made of Chrome Molybdenum steel, with a 1/2 inch square drive for impact wrench use.
Available Sizes (14) Show all 14 sizes Hide sizes
Genius Tools E-Star Deep Impact Sockets 1/2" Dr.
Genius Tools E-Star Deep Impact Sockets extend the reach of an E-Star socket for fasteners set deep in a housing or surrounded by other parts. The 78mm body lets the star opening seat fully on the bolt head while the impact wrench stays clear of the obstruction.
Fourteen sizes are available, from E-8 to E-32: E-8, E-10, E-11, E-12, E-14, E-16, E-18, E-20, E-22, E-24, E-26, E-28, E-30 and E-32. Because every size shares the same length, swapping between them does not change how far the wrench sits from the work.
The star opening matches external star fastener heads used on many vehicles and machines. These sockets are made of Chrome Molybdenum steel and connect to 1/2 inch square drive impact wrenches and accessories.
If the fastener is easy to reach, the standard-depth E-Star series in the same sizes keeps the setup shorter. Choose the deep version when the bolt sits in a recess, behind a housing, or has thread showing past the head that a short socket cannot clear.
- Type: deep E-Star (external star) impact socket
- Drive: 1/2" square
- Sizes: E-8 to E-32 (14 sizes)
- Length: 78mm
- Material: Chrome Molybdenum Steel
| Type | Impact Sockets |
|---|
