Bit Holders (25mm - 35mm)
- Hex shank bit holders that hold screwdriver bits for use in drills, drivers and other tools with a hex chuck.
- Choose a 1/4 inch hex shank in 25mm or 35mm length, or a 5/16 inch hex shank in 35mm length.
- Short 25mm holder keeps the setup compact, while the 35mm length adds a little reach to the bit.
- Matching the shank size to your tool chuck gives a secure fit and steady bit control while driving screws.
- Made of Chrome Vanadium Steel, a strong alloy commonly used for driver accessories.
Available Lengths (3) Show all 3 lengths Hide lengths
-
Shank 1/4" · Length 25mm
$8.09
-
Shank 1/4" · Length 35mm
$10.09
- Shank 5/16" · Length 35mm Out of stock Sold out
Genius Tools Bit Holders (25mm - 35mm)
Genius Tools Bit Holders connect screwdriver bits to the tool that drives them. Each holder has a hex shank that fits into a hex chuck, so you can swap bits quickly and run screws with a powered or hand driver.
Three versions are available. Item 282408 has a 1/4 inch hex shank and is 25mm long. Item 283508 also has a 1/4 inch hex shank but is 35mm long. Item 283510 has a larger 5/16 inch hex shank and is 35mm long.
Pick the shank to match the chuck on your tool, and the length to suit the job. The 25mm holder keeps the tool as short as possible for tight spots, while the 35mm holders add a little extra reach.
All three bit holders are made of Chrome Vanadium Steel, an alloy chosen for strength and wear resistance in hand and driver accessories.
- Type: bit holder
- Shank: 1/4" hex (25mm, 35mm), 5/16" hex (35mm)
- Lengths: 25mm, 35mm
- Material: Chrome Vanadium Steel
| Type | Accessories |
|---|
