#5 Spline Dr. Metric Deep Impact Sockets
- Deep metric impact sockets with a #5 spline drive for large fasteners on long studs on trucks, buses and heavy equipment.
- Twelve sizes from 22mm to 46mm, matching the standard-length #5 spline metric series size for size.
- Deep lengths of 80mm to 100mm reach over protruding studs and bolt ends so the socket seats fully on the nut.
- 6-point opening drives the nut on its flats, giving a secure hold that helps prevent rounding under impact.
- Made of Chrome Molybdenum Steel, an alloy used for impact sockets because it absorbs heavy shock loads.
Available Sizes (12) Show all 12 sizes Hide sizes
Genius Tools #5 Spline Dr. Metric Deep Impact Sockets
On many trucks and heavy machines the nut sits on a long stud that stops a standard socket from seating. Genius Tools #5 Spline Drive Metric Deep Impact Sockets give the extra depth needed while still fitting heavy-duty #5 spline-drive impact wrenches.
Twelve metric sizes are available: 22, 24, 25, 27, 29, 30, 32, 33, 35, 38, 41 and 46mm. These are the same sizes as the standard-length #5 spline metric sockets, so you can keep a shallow and deep socket for each fastener.
Lengths range from 80mm to 100mm. The 6-point opening grips the flats of the fastener, which spreads the load and helps keep corners intact when removing stubborn nuts.
Every socket is made of Chrome Molybdenum Steel, chosen for its toughness under the repeated impacts of a powerful wrench. Use them for wheel, suspension and driveline work on commercial vehicles and plant equipment.
- Type: 6-point deep impact socket, metric
- Drive: #5 spline
- Sizes: 22mm to 46mm (12 sizes)
- Length: 80mm to 100mm
- Material: Chrome Molybdenum Steel
| Type | #5 Spline Drive Impact Sockets |
|---|---|
| Point | 6 Point |
